Handset Settings; Setting Standby Display - TIPTEL easyDECT 3300 Bedienungsanleitung

easydect3300-uk.qxd

8. Handset Settings

Using the HS Settings menu, you can customize various settings for the handset such as the
standby display and language used to display the menu messages.
✍ For details on fuzzy dialing (which is under the HS Settings menu), please see par. 3.10.

8.1 Setting Standby Display

Using this feature, you can select the style of the dis-
play in Standby mode. You can choose between:
• Digital clock: it's the default Standby screen ex-
plained in par. 2.7. It shows the digital clock as
well as other parameters, such as the base
number, the handset number (or an handset
name you can enter as explained later on in this
paragraph) etc.
• Analogue clock: it's shows an elegant analogue
clock. In this condition you can't see the over
stated information, however as soon as you
press any key, the analogue clock temporarily
disappears restoring the normal handset condi-
tions.
To select a Standby display mode:
1. Press the MENU soft key to display the Main
menu items.
2. Press the navigation keys
peatedly to choose HS Settings, then press the
SELECT soft key.
3. Press the SELECT soft key to access
2:Standby Display: The current setting appears
inside the box with a check symbol on the right.
4. Press the
Clock or Analogue Clock, then press the
SELECT soft key.
14.11.2003 15:57
or key to choose Digital
Seite 35
5.At this time, if you have selected the Analogue
Clock go to step 7. Instead, if you have selected
the Digital Clock, you can choose if the
Standby screen should display the base number
and handset number or an alphanumeric name
you can assign (e.g. your name, your company
name, your office name etc.). Use the
key to choose ON if you want to show the
name or OFF to show the base number and
handset number.
6. At this time, if you have selected OFF, just go
to step 7. Instead, if you have selected ON,
type your preferred handset name. Enter it by
following the directions described in par.
4.1.c, then press the SELECT soft key to save
the name.
7. Press the key to return to Standby mode.
You will see the result of your settings (digital
re- clock with base/handset name, same with the
name you typed or the analogue clock).
or
H S
ANDSET ETTINGS
35