Gebruik het toestel niet in een omgeving waar explosiegevaar bestaat (bijvoorbeeld in spuiterijen, tankstations etc.). Draag uw tiptel easyDECT alleen inclusief de gebruiksaanwijzing over aan derden. Lever de gebruikte handset en oude en/of defecte batterijen in als klein chemische afval (KCA).
Seite 5
easy3300nl.qxd 14.11.2003 15:44 Seite 1 Inhoudsopgave...
Seite 6
easy3300nl.qxd 14.11.2003 15:44 Seite 2...
easy3300nl.qxd 14.11.2003 15:44 Seite 3 In gebruik nemen Leveringsomvang easy Basisstation Handset Telefoonkabel Voedingsadapters Hoofdtelefoon Gebruiksaanwijzing Accu (oplaadbare NiMH-accu) N GEBRUIK NEMEN...
Seite 8
easy3300nl.qxd 14.11.2003 15:44 Seite 4 Bedieningselementen Voorzijde handset Luidspreker Pijltjestoetsen Aansluiting hoofdtelefoon Display Functie toetsen Verbindingstoets Toets verbreken SMS toets Cijfertoetsen Toetsenblokkade Microfoon Achterzijde handset Riemclip Accuklepje Laadcontacten N GEBRUIK NEMEN...
Seite 9
easy3300nl.qxd 14.11.2003 15:44 Seite 5 Bedieningselementen Voorzijde basisstation Onderkant basisstation Paging-toets Aansluiting voor een analoge telefoon- Aansluiting voor de aansluiting voedingsadapter N GEBRUIK NEMEN...
easy3300nl.qxd 14.11.2003 15:44 Seite 6 Pictogrammen in het display N GEBRUIK NEMEN...
Seite 11
easy3300nl.qxd 14.11.2003 15:44 Seite 7 Aansluiten 2. Steek de voedingsadapter met de kleine steker in de desbetreffende aansluiting aan de achterzijde van het basisstation. 1. Steek de telefoonaansluitkabel met de Steek de voedingsadapter zelf in het kleine steker in de desbetreffende 230 V stopcontact.
easy3300nl.qxd 14.11.2003 15:44 Seite 8 Accu plaatsen 3. Schuif het accuklepje omhoog tot het vast klikt. 1. Schuif het accuklepje in de richting van de pijl en verwijder deze. 2. Verwijder eventueel de oude accu, steek de connector van de accu in de connector van de handset en plaats de accu.
easy3300nl.qxd 14.11.2003 15:44 Seite 9 Handset opladen U laadt de handset op door deze op de lader te plaatsen. Handset met riemclip N GEBRUIK NEMEN...
easy3300nl.qxd 14.11.2003 15:44 Seite 10 Handset aan/uit zetten 1. Als de handset uit is, houdt u de verbreken toets langer dan 2 sec. ingedrukt om de handset aan te zetten. 2. Als de handset aan is, houdt u de verbreken toets langer dan 2 sec. ingedrukt tot Bye Bye in het display verschijnt.
easy3300nl.qxd 14.11.2003 15:44 Seite 11 Datum en tijd instellen 5. Geef de datum en tijd in met de numerieke toetsen. 1. Druk op de toets Menu om de opties van het hoofdmenu weer te geven. 2. Druk net zo vaak op de pijltjestoetsen INT of tot BS instellingen in het 6.
easy3300nl.qxd 14.11.2003 15:44 Seite 12 Basis functies Stand-by stand Uitgaand gesprek 1. Neem de handset en druk op de verbindingstoets. 1. Geef een telefoonnummer in. Controleer het nummer in het display. 2. Kies een telefoonnummer. 3. Beëindig het telefoongesprek door de verbreken toets in te drukken of de handset terug te plaatsen op de lader.
easy3300nl.qxd 14.11.2003 15:44 Seite 13 Inkomend gesprek Als de handset op de lader staat, hoeft u deze alleen maar van de lader te pakken om de oproep te beantwoorden. 2. Beëindig het telefoongesprek door de 1. Om de oproep te beantwoorden drukt u op verbreken toets in te drukken of de hand- een willekeurige toets wanneer de handset set terug te plaatsen op de lader.
Seite 18
easy3300nl.qxd 14.11.2003 15:44 Seite 14 Nummerherhaling 3. Druk op de pijltjestoets om door de nummerherhalingslijst te bladeren tot u het gewenste nummer heeft gevonden. 4. Druk nu op de verbindingstoets om het nummer te kiezen. 1. Druk op de toets Lijst vanuit de stand-by stand.
easy3300nl.qxd 14.11.2003 15:44 Seite 15 Fuzzy dialing 1. Geef in de stand-by stand de eerste cijfers in van het gewenste telefoonnummer. 1. Druk op de toets Menu om de opties van het hoofdmenu weer te geven. 2. Indien u het voorgestelde nummer niet wilt gebruiken, kunt u gewoon doorgaan met 2.
easy3300nl.qxd 14.11.2003 15:44 Seite 16 Volume oproepsignaal 4. Druk op de pijltjestoets om het gewenste volume te kiezen. 1. Druk op de toets Menu om de opties van het hoofdmenu weer te geven. 2. Druk net zo vaak op de pijltjestoetsen 5.
easy3300nl.qxd 14.11.2003 15:44 Seite 18 Toetsenbord blokkeren 1. Houdt de toets in de stand-by stand langer dan één seconde ingedrukt. 2. Wanneer u nogmaals langer dan één sec. op de toets drukt, zal de toetsen- blokkade worden uitgeschakeld. Paging 2. Stop paging door nogmaals op de Paging toets te drukken of door een willekeurige toets op een handset in te drukken.
Seite 23
easy3300nl.qxd 14.11.2003 15:44 Seite 19 Telefoonlijsten Telefoonboek Telefoonnummer opslaan via het 6. Als u zowel een vast als een mobiel nummer heeft ingevoerd dient u voor beide telefoonboek telefoonnummers stap 4 en 5 te herhalen. 1. Druk in de stand-by stand op de toets Lijst.
easy3300nl.qxd 14.11.2003 15:44 Seite 20 Telefoonboek Naam in telefoonboek ingeven 1. Druk op de toets met het gewenste karakter: • Eénmaal voor het eerste karakter Kiespauze instellen • Tweemaal voor het tweede karakter enzovoort 1. Druk terwijl u een telefoonnummer ingeeft op de toets Wijzig.
Seite 25
easy3300nl.qxd 14.11.2003 15:44 Seite 21 Telefoonboek 3. Voer de eerste letters van de naam in met 3. Als u het gewenste nummer heeft de alfanumerieke toetsen en druk op de gevonden, druk u op de verbindings- toets OK. toets om het telefoonnummer kiezen. Druk op de verbreken toets om terug te keren naar de stand-by stand.
Seite 26
easy3300nl.qxd 14.11.2003 15:44 Seite 22 Nummerherhalingslijst Opties nummerherhalingslijst Telefoonnummer in de nummerher- halingslijst zoeken en kiezen. 1. Zoek de gewenste ingave in de 1. Druk op de toets Lijst vanuit de stand-by- nummerherhalingslijst. Zie stap 1 t/m 3 stand. "Telefoonnummer in de nummerher- halingslijst zoeken en kiezen"...
Seite 27
easy3300nl.qxd 14.11.2003 15:44 Seite 23 Oproeplijst 4. Druk op de verbindingstoets om het telefoonnummer te kiezen. Druk op de verbreken toets om terug te gaan naar de stand-by stand. Opties oproeplijst 1. Zoek de gewenste ingave in de oproeplijst. Zie stap 1 t/m 3 "Telefoonnummer zoeken en kiezen uit de oproeplijst "...
Seite 28
easy3300nl.qxd 14.11.2003 15:44 Seite 24 Menu’s Toegang menu’s 1. Druk op de toets Menu om de opties van het hoofdmenu weer te geven. 2. Typ het nummer van de gewenste optie in. Bijvoorbeeld: Toets 2 in voor het menu Belsign & Tonen en daarna 2 voor het submenu Oproepmelodie.
easy3300nl.qxd 14.11.2003 15:44 Seite 25 Menu overzicht ’...
Seite 30
easy3300nl.qxd 14.11.2003 15:44 Seite 26 Belsignaal & Tonen Toets klik instellen MENU 2 1 4. Druk op de pijltjestoets om de gewenste instelling te kiezen. 1. Druk op de toets Menu om de opties van het hoofdmenu weer te geven. 2.
Seite 31
easy3300nl.qxd 14.11.2003 15:44 Seite 27 Ruststand instellen MENU 2 4 3. Druk net zo vaak op de pijltjestoets tot optie 4:Ruststand in het display verschijnt en druk op de toets Kies. 4. Kies met de pijltjestoets de optie AAN om de ruststand te activeren of de optie UIT om de functie uit te schakelen.
Seite 32
easy3300nl.qxd 14.11.2003 15:44 Seite 28 Kalender Alarm MENU 3 1 Alarmfunctie activeren 1. Druk op de toets Menu om de opties van 8. Druk op de pijltjestoets om naar het het hoofdmenu weer te geven. veld Bericht te gaan en geef een bericht van maximaal 12 tekens in.
Seite 33
easy3300nl.qxd 14.11.2003 15:44 Seite 29 Agenda MENU 3 2 8. Druk op de toets OK om de instelling op te slaan. De datum van de afspraak wordt geaccentueerd. 9. Herhaal bovenstaande stappen om nog een afspraak in te plannen. Afspraak inplannen Druk op de verbreken toets om terug te keren naar de stand-by stand.
Seite 34
easy3300nl.qxd 14.11.2003 15:44 Seite 30 Geplande afspraak wijzigen 4. Gebruik de pijltjestoetsen om te bladeren naar de datum waarvan u de geplande 1. Druk op de toets Menu om de opties van afspraak wilt wijzigen en druk op de toets het hoofdmenu weer te geven.
easy3300nl.qxd 14.11.2003 15:44 Seite 31 Handset instellingen Display verlichting instellen MENU 4 1 4. Druk op de pijltjestoets om de gewenste kleur voor de display verlichting in te stellen. 1. Druk op de toets Menu om de opties van het hoofdmenu weer te geven. 2.
easy3300nl.qxd 14.11.2003 15:44 Seite 32 Stand-by-stand MENU 4 2 5. Als u de analoge klok heeft gekozen, wordt de instelling opgeslagen en keert de handset terug naar het vorige menu. Ga verder met Stap 9. Heeft u voor de digitale klok gekozen volg dan de volgende stappen: 6.
easy3300nl.qxd 14.11.2003 15:44 Seite 33 Taal selecteren MENU 4 4 tot optie 4:Taal in het display verschijnt en druk op de toets Kies. 1. Druk op de toets Menu om de opties van het hoofdmenu weer te geven. 4. Met de pijltjestoets kiest u de 2.
easy3300nl.qxd 14.11.2003 15:44 Seite 34 Basisstation kiezen MENU 4 6 3. Druk net zo vaak op de pijltjestoets tot optie 6:Kies basis in het display verschijnt en druk op de toets Kies. 4. Druk op de pijltjestoets en kies het gewenste basisstation. Druk nu op de toets Kies.
Seite 39
easy3300nl.qxd 14.11.2003 15:44 Seite 35 Call by Call Call by Call-nummer kiezen 2. Druk op de pijltjestoets en kies het gewenste Call by Call -nummer en druk op de toets Kies. 1. Druk op de toets in de stand-by stand. 3.
Seite 40
easy3300nl.qxd 14.11.2003 15:44 Seite 36 Voorkiesnummer instellen MENU 4 8 3. Druk net zo vaak op de pijltjestoetsen tot optie 8: Voorkiesnummer in het display verschijnt en druk op de toets Kies. 4. Voer het voorkiesnummer in met de numerieke toetsen en druk op de toets 1.
Seite 41
easy3300nl.qxd 14.11.2003 15:44 Seite 37 Basisstation instellingen PIN-code basisstation wijzigen MENU 5 1 4. Druk op de toets Kies om optie 1:Wijzig PIN code te openen. 5. Geef een vier-cijferige PIN-code in voor het basisstation en druk op de toets OK. 6.
easy3300nl.qxd 14.11.2003 15:44 Seite 38 Handset afmelden MENU 5 2 5. Wilt u de handsets één voor één afmelden geef dan het nummer(s) van de handset(s) 1. Druk op de toets Menu om de opties van in en druk vervolgens op de toets OK. het hoofdmenu weer te geven.
Seite 43
easy3300nl.qxd 14.11.2003 15:44 Seite 39 Nummerblokkering MENU 5 4 5. Druk net zo vaak op de pijltjestoets tot de gewenste positie (1 t/m 4) in het display verschijnt en druk op de toets Kies. 6. Druk op de pijltjestoets en kies AAN om de nummerreeks te activeren en UIT om deze te deactiveren.
Seite 44
easy3300nl.qxd 14.11.2003 15:44 Seite 40 Basisstation resetten MENU 5 6 4. Druk net zo vaak op de pijltjestoets tot optie 6:Basis reset in het display verschijnt en druk op de toets Kies. 1. Druk op de toets Menu om de opties van het hoofdmenu weer te geven.
Seite 45
easy3300nl.qxd 14.11.2003 15:44 Seite 41 Favoriet Bioritme calculator MENU 6 1 5. Als u de datum heeft ingegeven vraagt de handset om de bioritme datum. Geef hier de datum in, zoals hierboven beschreven, waarvan u uw bioritme wil berekenen (bijv. de huidige datum) en druk op de 1.
Seite 46
easy3300nl.qxd 14.11.2003 15:44 Seite 42 Wereldtijd MENU 6 2 4. Druk net zo vaak op de pijltjestoets tot u de gewenste tijdzone heeft gevonden en druk op de toets Kies. In het display wordt de tijdzone die u heeft 1. Druk op de toets Menu om de opties van ingegeven weergegeven met een verticale het hoofdmenu weer te geven lijn.
Seite 47
easy3300nl.qxd 14.11.2003 15:44 Seite 43 Calculator MENU 6 3 5. Kies de gewenste berekening met de pijltjestoets + (optellen), – (aftrekken), (vermenigvuldigen), / (delen). 6. Geef het tweede getal in met de numerieke toetsen. 1. Druk op de toets Menu om de opties van het hoofdmenu weer te geven.
easy3300nl.qxd 14.11.2003 15:44 Seite 44 Walkie Talkie MENU 6 4 4. Voer een 4-cijferig nummer in van het gewenste kanaal en druk op de toets OK. 5. Druk op de verbindingstoets om verbinding te krijgen met de andere handset. En spreek de andere handset op 1.
Seite 49
easy3300nl.qxd 14.11.2003 15:44 Seite 45 SMS (Short Message Service) MENU 6 5 server 2 in het display verschijnt en druk op de toets Kies. Voer nu het server- nummer in voor het ontvangen van SMS berichten. U kunt hier ook maximaal 16 cijfers invoeren.
easy3300nl.qxd 14.11.2003 15:44 Seite 46 verschijnt en bevestig met kies. Selecteer 2. Druk net zo vaak op de pijltjestoets vervolgens optie 5:SMS met de pijltjes-toets tot optie 3:Outbox in het display . Bevestig uw keuze met de toets verschijnt en druk op de toets Kies. Kies.
Seite 51
easy3300nl.qxd 14.11.2003 15:44 Seite 47 2. Druk net zo vaak op de pijltjestoets tot optie 2:Inbox in het display verschijnt en druk op de toets Kies. 3. Druk op de pijltjestoets om een bericht te selecteren dat u wilt lezen en druk op de toets Kies.
easy3300nl.qxd 14.11.2003 15:44 Seite 48 Alle berichten wissen 3. Druk op de pijltjestoets en kies de optie Inbox wissen of de optie Outbox wissen en bevestig uw keuze met de toets Kies. 1. Druk op de toets SMS om de opties van het SMS-menu weer te geven.
Seite 53
easy3300nl.qxd 14.11.2003 15:44 Seite 49 Overigen Oplossingen bij problemen Technische gegevens VERIGEN...
Seite 54
easy3300nl.qxd 14.11.2003 15:44 Seite 50 Service VERIGEN...
Seite 55
easy3300nl.qxd 14.11.2003 15:44 Seite 51 Garantie Schoonmaken CE-keuring VERIGEN...
Seite 56
cover3300int.qxd 14.11.2003 16:07 Seite 1...
Seite 57
cover3300int.qxd 14.11.2003 16:07 Seite 1...
Seite 58
14.11.2003 15:49 Seite 1 Bedienungsanleitung Schnurloses DECT-Telefon tiptel easy DECT 3300 tiptel...
Einschalten sichern. Nutzen Sie das Telefon nicht in explosionsgefährdeten Umgebungen (z. B. Lackierereien). Geben Sie Ihr tiptel easyDECT nur mit der Bedienungsanleitung an Dritte weiter. Entsorgen Sie Akkus und Telefon umweltgerecht. ! Nicht alle in dieser Bedienungsanleitung beschriebenen Funktionen sind in allen...
easy3300-d.qxd 14.11.2003 15:49 Seite 1 Inhaltsverzeichnis V V o o r r d d e e m m G G e e b b r r a a u u c c h h Verpackungsinhalt ..........3 Position und Funktion der Bedienelemente .
Seite 61
easy3300-d.qxd 14.11.2003 15:49 Seite 2 M M e e n n ü ü s s Menümodus aufrufen ..........24 Liste der Menüfunktionen .
easy3300-d.qxd 14.11.2003 15:49 Seite 3 Vor dem Gebrauch Verpackungsinhalt Wenn Sie Ihr Telefon auspacken, sollten Sie sich vergewissern, dass alle unten gezeigten Teile vorhanden sind. Sollte ein Teil fehlen oder beschädigt sein, so wenden Sie sich bitte an Ihren Händler. Basisstation Handset Telefonkabel*...
easy3300-d.qxd 14.11.2003 15:49 Seite 4 Position und Funktion der Bedienelemente Navigationstasten oder Vorderseite des Mobilteils Im Menümodus laufen Sie mit Hörer diesen Tasten durch die Menü- optionen. Im Standby-Modus blättern Sie mit diesen Tasten durch das Telefonbuch. Während eines Telefonats dienen die Tasten zum Einstellen der Lautstärke.
easy3300-d.qxd 14.11.2003 15:49 Seite 5 Position und Funktion der Bedienelemente Vorderseite der Basisstation Rückseite der Basisstation Paging-Taste Ruft das Mobilteil. Dient auch zum Anmelden eines Mobilteils an der Basisstation. Telefonbuchse Stromanschluss OR DEM GEBRAUCH...
easy3300-d.qxd 14.11.2003 15:49 Seite 6 Kabel anschließen So schließen Sie das Telefon- und Netzkabel an die 2. Verbinden Sie den Modularstecker des Basisstation an: Netzteils mit der Netzteilbuchse neben dem Telefonanschluss. Das andere Ende 1. Schließen Sie ein Ende des Telefonkabels verbinden Sie mit einer normalen an die Telefonbuchse auf der Rückseite Netzsteckdose.
easy3300-d.qxd 14.11.2003 15:49 Seite 7 Akku einlegen Ein aufladbarer NiMH-Akku wird mit Ihrem Telefon 3. Schieben Sie die Akkufachabdeckung in mitgeliefert. Bevor Sie Ihr Telefon in Betrieb nehmen, entgegengesetzter Richtung wieder auf müssen Sie den Akku einlegen. das Mobilteil, bis sie einrastet. 1.
easy3300-d.qxd 14.11.2003 15:49 Seite 8 Mobilteil aufladen Vor dem ersten Betrieb sollten Sie das Mobilteil mindestens 12 Stunden lang voll aufladen. Zum Aufladen des Mobilteils stellen Sie es einfach in die Ladestation. Ergebnis: Beim Ladevorgang wird das Mobilteil auto- matisch eingeschaltet und die Hintergrund- beleuchtung leuchtet kurz rot auf.
easy3300-d.qxd 14.11.2003 15:49 Seite 9 Anzeige Das Anzeigefeld besteht aus den folgenden drei Bereichen: Symbolbereich. Siehe hierzu die unten stehende Tabelle. Text- und Grafikbereich. In diesem Bereich werden Betriebsinformation wie z. B. die Nummer Ihres Gesprächspartners, die Gesprächsdauer, Menüs usw. angezeigt.
easy3300-d.qxd 14.11.2003 15:49 Seite 10 Mobilteil ein-/ausschalten Wenn Sie das Mobilteil zum Aufladen in die So schalten Sie das Mobilteil im Standby-Modus ein Ladestation stellen, schaltet es sich automatisch ein. und aus: Das Telefon ist nun betriebsbereit. 1. Um das Mobilteil bei ausgeschaltetem Beim ersten Einschalten des Telefons wird im Anzeigefeld einzuschalten, halten Sie die Anzeigefeld die Nummer des Mobilteils sowie...
easy3300-d.qxd 14.11.2003 15:49 Seite 11 3. Geben Sie die PIN ein und drücken Sie die 5. Wählen Sie mit den Tasten oder Anzeige-Taste OK. zwischen TONWAHL und IMPULSWAHL. Ergebnis: Die Basis-PIN ist werksseitig auf "0000" 6. Drücken Sie die Anzeige-Taste WÄHLEN, eingestellt.
easy3300-d.qxd 14.11.2003 15:49 Seite 12 Grundlegende Funktionen Standby-Modus Der Standby-Modus ist die Anzeige, die beim ersten Im Standby-Modus können Sie mit dem Telefon Einschalten des Mobilteils erscheint. Wenn sich Ihr Anrufe tätigen und entgegennehmen oder Telefon im Standby-Modus befindet, erscheint die Menüfunktionen aufrufen.
easy3300-d.qxd 14.11.2003 15:49 Seite 13 Anrufe entgegennehmen Bei eingehenden Anrufen klingelt das Telefon und im Wenn das Mobilteil in der Ladestation steht, Anzeigefeld erscheint eine Grafik oder eine Rufnum- nehmen Sie es einfach aus der Ladestation. mer, die einen ankommenden Anruf anzeigt. Im Sie müssen in diesem Fall keine Taste Symbolbereich des Anzeigefelds blinkt das Symbol drücken.
easy3300-d.qxd 14.11.2003 15:49 Seite 14 Wahlwiederholung Ihr Telefon hält die 20 zuletzt gewählten Rufnummern 4. Zum Anwählen der Nummer drücken Sie zur Wahlwiederholung bereit. die Taste So können Sie die Nummern anzeigen und anwählen: H H i i n n w w e e i i s s e e : : •...
easy3300-d.qxd 14.11.2003 15:49 Seite 15 Wählen mit automatischer Ergänzung (Fuzzy-Wahl) Mit dieser Wähloption können Sie Rufnummern So wählen Sie eine Nummer mit Unterstützung durch finden, indem Sie einfach die ersten paar Stellen die automatische Ergänzung: eingeben. Um eine Rufnummer auf diese Weise zu wählen, 1.
easy3300-d.qxd 14.11.2003 15:49 Seite 16 Ruftonlautstärke einstellen Sie können die Lautstärke auf einer Skala von 1 bis 4. Wählen Sie mit den Tasten oder 3 einstellen (größere Zahlen bedeuten höhere gewünschte Lautstärke aus. Lautstärke). Mit der Option A A U U S S können Sie den Tonruf (Klingelton) ganz ausschalten.
easy3300-d.qxd 14.11.2003 15:49 Seite 17 Akku-Ladeanzeige Bei niedrigem Ladezustand ertönt ein Warnsignal und Das Symbol wird fortlaufend oben rechts im das Symbol beginnt zu blinken. Anzeigefeld angezeigt. Dieses Symbol zeigt den Wenn der Akku nicht mehr genügend Strom für den Ladezustand Ihres Akkus an.
easy3300-d.qxd 14.11.2003 15:49 Seite 18 Tastatur am Mobilteil sperren Um unbeabsichtigte Tastenbetätigung zu vermeiden, Ergebnis: Im Anzeigefeld erscheint T T A A S S T T E E N N S S P P E E R R R R E E . Alle Tasten außer sind nun gesperrt.
easy3300-d.qxd 14.11.2003 15:49 Seite 19 Anrufliste Mit der Anzeige-Taste L L I I S S T T E E können Sie im Standby-Modus auf das Telefonbuch sowie die Listen "Abgehender Ruf" und "Eingehender Ruf" zugreifen. Telefonbuch Mit der Telefonbuchoption können Sie häufig 5.
easy3300-d.qxd 14.11.2003 15:49 Seite 20 Telefonbuch Pause eingeben 2. Wählen Sie die anderen Buchstaben entsprechend aus. Sobald Sie eine andere Das Eingeben einer Pause ist bei interaktiven Telefon- Taste drücken, bewegt sich die Schreib- systemen wie z. B. Telefonbanking-Systemen nützlich. marke um eine Stelle nach rechts.
easy3300-d.qxd 14.11.2003 15:49 Seite 21 Telefonbuch 3. Geben Sie über die alphanumerischen Drücken Sie bei Bedarf die Taste oder , um für den ausgewählten Eintrag eine Tasten die Anfangsbuchstaben des Namens Nummer aus einer anderen Speicherposition ein und drücken Sie die Anzeige-Taste OK. auszuwählen.
easy3300-d.qxd 14.11.2003 15:49 Seite 22 Abgehender Ruf (Wahlwiederholung) Sie können die 20 zuletzt gewählten Nummern Optionen für abgehende Anrufe anzeigen und anwählen. Mit den Optionen für abgehende Anrufe können Sie Nummern aus der Liste der abgehenden Anrufe Nummern in der Liste der abgehen- ändern, speichern oder löschen.
easy3300-d.qxd 14.11.2003 15:49 Seite 23 Eingehender Ruf Bei eingehenden Anrufen wird die Rufnummer des 4. Um die Nummer anzuwählen, drücken Sie Anrufers angezeigt, sofern diese Daten vom Netz- die Taste anbieter des Anrufers übertragen werden. Die 30 zuletzt entgegengenommenen Anrufe werden in der Um das Menü...
easy3300-d.qxd 14.11.2003 15:49 Seite 24 Menüs Ihr Telefon bietet eine Reihe von Funktionen, mit denen Sie es individuell anpassen können. Diese Funktionen sind in verschiedenen Menüs und Untermenüs zusammengefasst. Menümodus aufrufen Zum Aufrufen des Menümodus gibt es zwei So rufen Sie eine Menüoption anhand der Options- verschiedene Möglichkeiten: nummer auf: •...
easy3300-d.qxd 14.11.2003 15:49 Seite 25 Liste der Menüfunktionen Diese Liste zeigt die Struktur der verfügbaren 5. BS Einstellung Menüoptionen und gibt zusätzlich deren Nummern an. 1: PIN ändern (Seite 37) 2: Abmelden HS (Seite 38) 3: Wahlverfahren (Seite 10) 1. Telefoonbuch 4: Sperrliste (Seite 39) 1: Daten suchen (Seite 20) 5: Flashzeit (Seite 39)
easy3300-d.qxd 14.11.2003 15:49 Seite 26 Tasten-/Ruftöne Im Menü "Tasten-/Ruftöne" können Sie folgende Tonoptionen einstellen: Tastenklick, Rufmelodie, Ruflautstärke und Nachtmodus. Nähere Informationen zum Einstellen von Rufmelodie und -lautstärke finden Sie auf Seite 16. Tastenklick einstellen MENÜ 2 1 Sie können das Mobilteil so einstellen, dass beim 4.
easy3300-d.qxd 14.11.2003 15:49 Seite 27 Nachtmodus einstellen MENÜ 2 4 Mit dieser Funktion können Sie den Klingelton so leise 3. Wählen Sie mit der Taste oder einstellen, dass Sie nachts nicht gestört werden. Ist Option "4:Nachtmodus" aus und drücken diese Funktion auf "A A N N " gestellt, wird die Rufton- Sie die Anzeige-Taste WÄHLEN.
easy3300-d.qxd 14.11.2003 15:49 Seite 28 Notizbuch Mit den Optionen im Menü "Notizbuch" können Sie Ihr Telefon als Wecker und Terminplaner nutzen. Weckfunktion MENU 3 1 Mit dieser Funktion können Sie die Weckfunktion auf H H i i n n w w e e i i s s e e : : eine bestimmte Uhrzeit einstellen.
easy3300-d.qxd 14.11.2003 15:49 Seite 29 Terminplan MENÜ 3 2 Mit dieser Funktion können Sie bis zu 10 Termine Tasten oder eine Rufmelodie für den einstellen. Termin aus. 8. Drücken Sie die Anzeige-Taste OK, um die Hinweis: Zur Nutzung dieser Funktion müssen Sie die Einstellung zu speichern.
Seite 89
easy3300-d.qxd 14.11.2003 15:49 Seite 30 Eingestellte Termine ändern Ergebnis: Der Termin des ausgewählten Tages erscheint. 1. Rufen Sie die Option "Terminplan" im 3. Ändern Sie den Termin und drücken Sie die Menü "Notizbuch" auf. Anzeige-Taste OPTION. Ergebnis: Tage mit eingestellten Terminen werden im 4.
easy3300-d.qxd 14.11.2003 15:50 Seite 31 Mobilteil-Einstellungen Hintergrundfarbe MENÜ 4 1 Sie können die Farbe der Display-Hintergrund- 4. Wählen Sie mit der Taste oder beleuchtung entsprechend Ihren Wünschen oder gewünschte Farbe aus. Nach jedem passend zur Umgebung einstellen. Tastendruck wechselt die Hintergrund- beleuchtung zu der gewählten Farbe.
easy3300-d.qxd 14.11.2003 15:50 Seite 32 Stand-by-Anzeige einstellen MENÜ 4 2 Mit dieser Funktion können Sie festlegen, was im 5. Gehen Sie jetzt zu Schritt 7, wenn Sie Standby-Modus auf dem Anzeigefeld angezeigt wird. "Analoguhr" ausgewählt haben. Ansonsten Sie haben folgende Wahlmöglichkeiten: können Sie jetzt entscheiden, ob der Mobilteilname (z.
easy3300-d.qxd 14.11.2003 15:50 Seite 33 Sprache auswählen MENÜ 4 4 Sie können die Anzeigesprache ändern. die Anzeige-Taste WÄHLEN. 1. Drücken Sie die Anzeige-Taste MENÜ, um Ergebnis: Im Kasten erscheint die aktuelle Einstellung mit die Einträge des Hauptmenüs anzuzeigen. einem Häkchen. 2.
easy3300-d.qxd 14.11.2003 15:50 Seite 34 Basisstation auswählen MENÜ 4 6 Ihr Mobilteil kann mit bis zu vier Basisstationen 3. Wählen Sie mit der Taste oder verwendet werden. Über diese Menüoption können Option "6:Basis wählen" aus und Sie festlegen, welche Basisstation Sie verwenden drücken Sie die Anzeige-Taste WÄHLEN.
easy3300-d.qxd 14.11.2003 15:50 Seite 35 Call by Call Call-by-Call-Nummern wählen 2. Wählen Sie mit der Taste oder gewünschte Call-by-Call-Nummer aus und Bei manueller Wahl der Rufnummer: drücken Sie die Anzeige-Taste WÄHLEN. 1. Drücken Sie im Standby-Modus die Ergebnis: In der ersten Zeile erscheint "Anruf nach", in Taste der zweiten Zeile die Call-by-Call-Nummer.
easy3300-d.qxd 14.11.2003 15:50 Seite 36 Zugangscode (Amtsholung) einstellen MENÜ 4 8 An manchen Telefonanlagen müssen Sie eine Ziffer 3. Wählen Sie mit der Taste oder zur Amtsholung (z. B. 0) eingeben und auf ein Option "8:Zugangscode" aus und drücken weiteres Freizeichen warten, bevor Sie eine externe Sie die Anzeige-Taste WÄHLEN.
easy3300-d.qxd 14.11.2003 15:50 Seite 37 Basisstation-Einstellungen Mit dem Menü "BS Einstellung" können Sie die Basisstation an Ihre Bedürfnisse anpassen. Zum Zugriff auf dieses Menü ist eine Basisstation-PIN (persönliche Identifikationsnummer) nötig. H H i i n n w w e e i i s s : •...
easy3300-d.qxd 14.11.2003 15:50 Seite 38 Mobilteil deaktivieren (abmelden) MENÜ 5 2 Sie können das Mobilteil bei Bedarf von der Ergebnis: Im Anzeigefeld werden alle momentan an der Basisstation angemeldeten Mobilteile angezeigt. Basisstation abmelden. 5. Um Mobilteile einzeln abzumelden, geben 1. Drücken Sie die Anzeige-Taste MENÜ, um Sie die Nummer des gewünschten die Einträge des Hauptmenüs anzuzeigen.
easy3300-d.qxd 14.11.2003 15:50 Seite 39 Sperrliste MENÜ 5 4 Sie können die von Ihrem Telefon aus anwählbaren 4. Wählen Sie mit der Taste oder Rufnummernbereiche einschränken. Rufnummern, die Option "4:Sperrliste" aus und drücken mit den in diesem Menü festgelegten Ziffern Sie die Anzeige-Taste WÄHLEN.
easy3300-d.qxd 14.11.2003 15:50 Seite 40 Basisstation zurücksetzen MENÜ 5 6 Sie können alle Optionen im Menü "BS Einstellung" 4. Wählen Sie mit der Taste oder auf den Auslieferzustand zurücksetzen. Option "6:Basis Reset" aus und drücken Sie die Anzeige-Taste WÄHLEN. 1. Drücken Sie die Anzeige-Taste MENÜ, um die Einträge des Hauptmenüs anzuzeigen.
easy3300-d.qxd 14.11.2003 15:50 Seite 41 Favorit Über das Menü "Favorit" haben Sie Zugriff auf die SMS-Funktionen, den Walkie-Talkie-Modus sowie Biorhyth- mus, Weltzeit und Taschenrechner. Mit der SMS-Option können Sie Kurznachrichten verschicken und empfangen. Die Walkie-Talkie-Option ermöglicht Ihnen die Nutzung von zwei Mobilteilen in der Art von Walkie-Talkie- Sprechfunkgeräten.
easy3300-d.qxd 14.11.2003 15:50 Seite 42 Weltzeit MENÜ 6 2 Die Funktion Weltzeit erlaubt es Ihnen, sich über das In der Anzeige erscheint eine Weltkarte aktuelle Datum und die Uhrzeit an jedem Ort der Erde sowie Datum und Uhrzeit des von Ihnen zu informieren.
easy3300-d.qxd 14.11.2003 15:50 Seite 43 Taschenrechner MENÜ 6 3 Mit dieser Funktion können Sie Ihr Telefon als 6. Geben Sie über die Zifferntasten die Taschenrechner nutzen. Der integrierte Taschen- zweite Zahl ein. rechner unterstützt die Grundrechenarten Addition, Subtraktion, Multiplikation und Division. 7.
easy3300-d.qxd 14.11.2003 15:50 Seite 44 Walkie-Talkie MENÜ 6 4 Zwei Mobilteile können wie Walkie-Talkies direkt 4. Geben Sie eine vierstellige Kanalnummer miteinander kommunizieren. Zur Nutzung dieser ein und drücken Sie die Anzeige-Taste Funktion müssen beide Mobilteile auf den gleichen WÄHLEN. Kanal eingestellt sein.
A A n n - u u n n d d A A b b m m e e l l d d e e n n b b e e i i d d e e r r M M i i t t t t e e i i l l u u n n g g s s z z e e n n t t r r a a l l e e ( ( D D e e u u t t s s c c h h l l a a n n d d ) ) * * * * Um den Empfang einer Festnetz-SMS an Ihrem tiptel easyDECT 3300 zu ermöglichen, müssen Sie das Gerät beim SMS-Service des Netzbetreibers registrieren.
Seite 105
Zielrufnummer 8 8 8 8 8 8 8 8 . Anschließend erhalten Sie vom SMS-Service der DeutschenTelekom eine kostenlose Bestätigung der Registrierung. Nun können Sie sicher sein, dass sowohl das Senden als auch der SMS-Empfang am tiptel easyDECT 5500 funktioniert.
easy3300-d.qxd 14.11.2003 15:50 Seite 47 Servicecenter-Nummer einstellen Nachrichten verfassen und absenden Zum Versand von Kurznachrichten (SMS) benötigen Sie können Textnachrichten mit einer Länge von bis Sie die Anwahlnummer eines SMS-Servicecenters. zu 160 alphanumerischen Zeichen verfassen und an- Diese Nummer erhalten Sie von Ihrem SMS-Service- schließend als Kurznachricht verschicken.
easy3300-d.qxd 14.11.2003 15:50 Seite 48 Nachrichten übertragen: 4. Wählen Sie mit der Taste oder entweder "1:Nr eingeben" oder Beim Versand der Nachricht erscheint im Anzeigefeld "2:Suche Nummer" aus. die Meldung " " S S M M S S s s e e n n d d e e n n " " und anschließend je nach Sendeverlauf "...
easy3300-d.qxd 14.11.2003 15:50 Seite 49 So zeigen Sie eine eingegangene Nachricht an: • G G e e s s p p r r ä ä c c h h f f ü ü h h r r e e n n : : Absender zurückrufen. •...
easy3300-d.qxd 14.11.2003 15:50 Seite 50 Alle Nachrichten löschen 3. Wählen Sie über die Tasten oder die gewünschte Nachricht aus und Sie können alle in der Inbox und Outbox gespeicherten drücken Sie die Anzeige-Taste WÄHLEN. Nachrichten löschen. Ergebnis: Im Anzeigefeld werden die Empfängernummer, So löschen Sie alle Nachrichten: der Nachrichtentext sowie die Uhrzeit des Nachrichtenversands angezeigt.
easy3300-d.qxd 14.11.2003 15:50 Seite 51 Sonstiges Fehlersuche M M ö ö g g l l i i c c h h e e P P r r o o b b l l e e m m e e u u n n d d A A b b h h i i l l f f e e S S y y m m p p t t o o m m •...
Ihre Ansprechstelle für Leistungen aus Gewährleistungsverpflichtungen ist der Fachhändler, bei dem Sie das Gerät erworben haben. Die TIPTEL AG leistet für Material und Herstellung des Telekommunikationsendgerätes eine Gewährleistung von 2 Jahren ab der Übergabe. Dem Käufer steht im Mangelfall zunächst nur das Recht auf Nacherfüllung zu. Die Nacherfüllung beinhaltet entweder die Nachbesserung oder die Lieferung eines Ersatzproduktes.
Sollten einmal Probleme auftreten, oder haben Sie Fragen zur Bedienung des Gerätes, wenden Sie sich bitte an Ihren Fachhändler. Dieser ist innerhalb der Gewährleistungszeit Ihr Ansprechpartner. Die TIPTEL AG hat für den technischen Support des Fachhandels eine spezielle Rufnummer eingerichtet, so dass dieser Sie qualifiziert beraten kann.
Seite 113
cover3300int.qxd 14.11.2003 16:07 Seite 1...
Seite 114
14.11.2003 15:56 Seite 1 Operating instructions Cordless DECT telephone tiptel easy DECT 3300 tiptel...
easydect3300-uk.qxd 14.11.2003 15:56 Seite 2 Safety precautions Only use the power supply unit supplied, as indicated on the underside of the device. Fit only the recommended rechargeable batteries of the same type! Use no other types of batteries or non-rechargeable batteries, as they could damage health and cause personal injury.
Seite 116
easydect3300-uk.qxd 14.11.2003 15:56 Seite 1 Contents 1 1 . . B B e e f f o o r r e e U U s s i i n n g g ..... . .3 5 5 .
Seite 117
easydect3300-uk.qxd 14.11.2003 15:56 Seite 2 Contents 1 1 1 1 . . F F a a v v o o r r i i t t e e ( ( s s p p e e c c i i a a l l f f u u n n c c t t i i o o n n s s ) ) ... . 63 11.1 Walkie talkie .
easydect3300-uk.qxd 14.11.2003 15:56 Seite 3 1. Before Using 1.1 Package Contents Once you have unpacked your phone, make sure that all the parts shown below are available. If any pieces are missing or broken, please promptly call your dealer. Handset Base ✍...
easydect3300-uk.qxd 14.11.2003 15:56 Seite 4 1.2 Part Names and their functions 1.2.a Handset front Display – shows the information and guides you through the various functions. For further details please see chapter 2.6 Ear-microphone jack (at the left side) – allows you to connect the supplied earphone/microphone Speaker –...
Seite 120
easydect3300-uk.qxd 14.11.2003 15:56 Seite 5 1.2.c Base front Charging slot – insert the handset into this slot to automatically start the battery charging. Inside the slot there are two charging contacts which match with the ones of the handset 1 1 0 0 1 1 1 1 1 1 3 3 1 1 2 2...
easydect3300-uk.qxd 14.11.2003 15:56 Seite 6 1.3 Key functions These are the basic functions of each key 1 1 4 4 (14) Soft keys - perform the functions indicated by the text immediately over them (on the bottom line of the display) which changes time by time 1 1 5 5 (15) Navigation keys...
easydect3300-uk.qxd 14.11.2003 15:56 Seite 7 2. Setting up 2.1 Installing the base 2.1.e Where installing the base Install the base in a dry and dust-free location away on them and don’t place the base where the cables be walked on. If the cables become damaged or frayed, from direct sunlight and make sure that both power contact the service center immediately.
easydect3300-uk.qxd 14.11.2003 15:56 Seite 8 Installing the battery The rechargeable Ni-MH battery comes with your phone. Install the battery before using your phone. 1. Slide the battery cover in the direction of the arrow, and remove it. 2. Remove the old battery (in case of battery replacing only) 3.
easydect3300-uk.qxd 14.11.2003 15:56 Seite 9 2.3 Charging the handset battery Before initial operation, you should fully charge the The LCD handset’s battery for 12 hours or more. backlight To charge the battery, simply place the handset on turns into the inside the charging slot of the base unit as red one time showed: during the charge the LCD backlight turns into red one time.
easydect3300-uk.qxd 14.11.2003 15:56 Seite 10 2.4 Using Handset Carrying Clip The supplied handset carrying clip allows you to con- ! Be sure that the clip is firmly locked to your pocket, belt etc. otherwise your handset may fall and be veniently carry the handset with you.
easydect3300-uk.qxd 14.11.2003 15:56 Seite 11 2.6 Display The display comprises the following three areas: Icons area. See the table below. Text and graphic area. This area displays in-use informa- tion such as the other party’s number, call duration, menus, etc. In Standby mode, it displays the base number, and the current time.
easydect3300-uk.qxd 14.11.2003 15:56 Seite 12 2.7 Choosing the Dial Mode In order to provide compatibility with other tele- 5. Press the key to choose TONE or phone systems, your phone can be set to either pulse- PULSE, then press the SELECT soft key to save dialing (rotary), or tone dialing (DTMF).
easydect3300-uk.qxd 14.11.2003 15:56 Seite 13 2.8 Setting Date & Time If you like to fully get benefit from the functions of 6. Press the SELECT soft key to save the setting. your cordless phone, you have to enter the current date and time.
easydect3300-uk.qxd 14.11.2003 15:56 Seite 14 3. Basic Functions 3.1 Standby Mode (waiting for incoming calls) Standby is the initial screen that appears every time you turn on the handset. When your phone is in Standby mode, you are ready to receive phone calls and you will see the handset and base number or the handset name (if you have one saved) and the current date and time: When your phone is in Standby mode, you can use the phone to make or receive calls, or to use menu functions.
easydect3300-uk.qxd 14.11.2003 15:56 Seite 15 3.2 Making a Call You can make your calls in two ways. This is the most traditional one: 2. If you have made mistakes (i.e. the number you 1. Pick up the handset and press the key dialed is not the one you want to call) modify engage the line.
easydect3300-uk.qxd 14.11.2003 15:56 Seite 16 3.3 Receiving a Call When a call is received, the phone rings and the icon ✍ If the handset is on the base, simply pick it up to answer blinks on the display. If the incoming call can be the phone.
easydect3300-uk.qxd 14.11.2003 15:56 Seite 17 3.6 Using Speakerphone During a call, you may turn on the speakerphone built in normal mode, press again the key . The icon in the handset. In this mode you can simply put your disappears. handset on a surface (e.g.
easydect3300-uk.qxd 14.11.2003 15:56 Seite 18 3.8 Flash signal When the line is engaged, the FLASH soft key sends To transfer a call, or use the said special the Flash signal. This key is used in conjunction with services, press the FLASH soft key while the line special services (e.g.
easydect3300-uk.qxd 14.11.2003 15:56 Seite 19 3.10 Fuzzy Dialing This convenient function speeds up the manual 2. Enter, one by one, the first digit(s) of the dialing of the numbers which you communicate phone number you want to call. If they match more frequently with.
easydect3300-uk.qxd 14.11.2003 15:56 Seite 20 3.11 Selecting Ring Type You can select your own ringing sound. 10 ring types 5. Press the SELECT soft key to save the setting. are available. 6. Press the key to return to Standby mode. 1.
easydect3300-uk.qxd 14.11.2003 15:56 Seite 21 3.12 Adjusting Ring Volume You can adjust the volume in three levels: Level 1 to 3, 4. Press repeatedly the key to choose the the higher the number, the louder the volume. You can volume level you want. Each time you press the also select OFF to turn the ringer off.
easydect3300-uk.qxd 14.11.2003 15:56 Seite 22 3.13.b Restoring the battery duty duty, try do fully discharge it (by normally using When possible, to keep the maximum battery duty, the phone) up to make the handset automatically charge the battery only when it is completely dis- switched off as over stated, then leave the handset in charged, (i.e.
easydect3300-uk.qxd 14.11.2003 15:56 Seite 23 3.15 Locking Keys on Handset This function is useful to avoid unwanted function key pressed till the display shows KEY activations by accidentally pressing any keys when LOCK. you are carrying your handset. If you activate the key lock, of the keys are inhibited, except for the To unlock the keys keep the key pressed...
easydect3300-uk.qxd 14.11.2003 15:56 Seite 24 4. Call Lists The LIST soft key in Standby mode allows you to access the Phonebook, Outgoing Calls list, and Incoming Calls list. 4.1 Phonebook 4. Press the key in order to highlight the fixed The phonebook built in your cordless phone allows telephone icon or the mobile telephone one, you to store frequently used numbers so that you can...
Seite 140
easydect3300-uk.qxd 14.11.2003 15:56 Seite 25 4.1.b Storing a Phone Number in Standby Mode Characters in the order displayed . , : ; ‘ “ / = – + ( ) < > You can store a phone number after dialing a number without accessing the Phonebook menu.
Seite 141
easydect3300-uk.qxd 14.11.2003 15:57 Seite 26 Example: to enter Ross, press: Alphabetic search • Three times the 7 key = R (the first character 1. Press the LIST soft key in Standby mode and is automatically set as capital) then press repeatedly to select 3:Phonebook, •...
Seite 142
easydect3300-uk.qxd 14.11.2003 15:57 Seite 27 Searching by scrolling the phonebook list 5. Now, depending on the over stated selection: • If you have selected 1:Edit, perform the 1. Press the key in Standby mode. The necessary editing using the command described display shows the whole list of all of the from step 3 in the par.
easydect3300-uk.qxd 14.11.2003 15:57 Seite 28 4.2 Redialling the Last Dialed Numbers Your phone allows you to quickly call again the last Using the outgoing calls options, you can edit, save, or 20 dialed numbers. delete a number in the outgoing calls list. 4.2.a Searching for and Dialing a Number in 1.
easydect3300-uk.qxd 14.11.2003 15:57 Seite 29 4.3 Incoming Calls When you receive a call, the caller’s phone number is 4.3.b Using Incoming Calls Options displayed, if the caller’s information is transmitted from the network on which the call was made and You can edit, save, or delete a number in the in- the caller don’t hide it.
easydect3300-uk.qxd 14.11.2003 15:57 Seite 30 5. Using Menus This phone offers a range of functions that allows you to tailor the phone to your needs. These functions are arranged in menus and submenus. 5.1 Accessing Menu Mode There are two ways to access the menu mode: by diagram stated the next chapter, or you can read it scrolling or by quick access.
easydect3300-uk.qxd 14.11.2003 15:57 Seite 31 5.2 List of Menu Functions This diagram shows the menu structure available and indicates the number assigned to each menu or option. For further details, please refer to the appropriate paragraph/chapter stated inside brackets). 1. Phonebook 5.
easydect3300-uk.qxd 14.11.2003 15:57 Seite 32 6. Bell & Beep You can use the Bell&Beep menu to customize the following sound options; key tone, ring type, ring volume and sleep mode. ✍ For information on setting the ring type and volume, see page par. 3.12 and 3.11 6.1 Setting Key Tone Every time you press a key, your handset 3.
easydect3300-uk.qxd 14.11.2003 15:57 Seite 33 7. Diary Using the Diary menu, you can use your phone as a convenient alarm clock and scheduler. 7.1 Alarm This option allows you to set a recurring daily/month- 7. You are now on the Time field. Set the time with hh:mm format by using the numeric keys.
easydect3300-uk.qxd 14.11.2003 15:57 Seite 34 7.2 Scheduler ✍ At step 5 you need to enter the hour in 24-hour format. Using this feature, you can schedule up to 10 one- You can move the cursor to the right or left by using the time events (meetings, dates, reminders etc.), each key.
easydect3300-uk.qxd 14.11.2003 15:57 Seite 35 8. Handset Settings Using the HS Settings menu, you can customize various settings for the handset such as the standby display and language used to display the menu messages. ✍ For details on fuzzy dialing (which is under the HS Settings menu), please see par. 3.10. 8.1 Setting Standby Display 5.At this time, if you have selected the Analogue Using this feature, you can select the style of the dis-...
easydect3300-uk.qxd 14.11.2003 15:57 Seite 36 8.2 Selecting a Language You can change the language used to display the 3. Press repeatedly the key to access menu messages. 4:Language option, then press the SELECT soft key. The current language appears inside 1.
easydect3300-uk.qxd 14.11.2003 15:57 Seite 37 ✍ 5. Hold down the Paging key on the rear of the base At step 4, if a check symbol appears at the right side of the base number, it indicates that the base number is unit for more than 3 seconds until you see the hand- already registered on your handset.
easydect3300-uk.qxd 14.11.2003 15:57 Seite 38 8.5 Call by Call (network code number) This feature lets you add special code numbers, 1. Press the key in Standby mode. The display which allows you to access different service providers shows the currently stored call by call numbers. The you might be subscribed.
easydect3300-uk.qxd 14.11.2003 15:58 Seite 39 8.6 Setting Access Code Some telephone systems, such as PABX (Private 3. Press repeatedly the key to choose Automatic Branch of eXchange) or KTS (Key 8:Access Code, then press the SELECT soft key. Telephone Systems), require an access code (e.g. 9 or 0) to access an external line and listen for the out- 4.
easydect3300-uk.qxd 14.11.2003 15:58 Seite 40 8.8 Setting LCD backlight color You can change the color of your display backlight 4. Press repeatedly the key to choose the according to your preferences and environment as backlight color you want. Each time you press the follows: navigation keys, the display shows the selected color.
easydect3300-uk.qxd 14.11.2003 15:58 Seite 41 9. Base settings You can customize your base unit to suit your preferences using the BS Settings menu. This menu is protected by a base PIN (Personal Identification Number) which is required for the access. ✍...
easydect3300-uk.qxd 14.11.2003 15:58 Seite 42 9.2 Deactivating a Handset If necessary, you can clear the registration of a regis- 4. Press repeatedly the key to choose tered handset in order to stop its access to one or 2:Release HS, then press the SELECT soft key. more base units.
easydect3300-uk.qxd 14.11.2003 15:58 Seite 43 9.4 Changing Flash Time During a conversation, the FLASH soft key allows 3. Enter the current base PIN to access the BS you to access the special services offered by the tele- Settings menu, and press the SELECT soft key. phone network or transfer a call to another extension when you are connected to a PABX (Private 4.
easydect3300-uk.qxd 14.11.2003 15:58 Seite 44 10. SMS, Email* and Fax* Using the SMS menu, you can create, send, receive, and save your text messages. You can also use the SMS to send fax or email messages (text only). To enable the SMS feature, you must subscribe to the SMS service supplier and set the service center numbers in your phone before using it.
Or, press the MENU soft key to display the * This feature may not be available with your Main menu items, then press the key to easyDECT 3300 country version. choose Favorite, then press SELECT soft key and select 5:SMS by pressing the SELECT soft key.
Seite 161
easydect3300-uk.qxd 14.11.2003 15:58 Seite 46 7. Press repeatedly the key to choose 10.3.b Sending a Fax message* the operation you want to do with the just typed SMS message: 1. Just start writing a normal SMS as described in steps from 1 to 3 in par. 10.3.a. •...
Seite 162
* This feature may not be available with your easyDECT 3300 country version. 10.3.d Message transmission When the message is being sent, the display shows Sending SMS and then shows Success! or Fail! according to the sending result.
easydect3300-uk.qxd 14.11.2003 15:58 Seite 48 10.4 Viewing Received Messages While a message is being received, the display 4. You can access the following options by shows Receiving SMS. Then, If the message is re- pressing the OPTION soft key: ceived properly, the display shows New Message until you read the message or you press any key.
easydect3300-uk.qxd 14.11.2003 15:58 Seite 49 10.5 Using Outbox The Outbox on your phone stores the last 20 out- 4. While you read the fax or e-mail, you can press going short messages, fax and e-mail messages the OPTION soft key to view the fax header or (both the successfully sent ones and the failed email address.
* This feature may not be available with your 2. Press repeatedly the key to choose easyDECT 3300 country version. 6:Key Settings, then press the SELECT soft key. SMS, E MAIL AND...
easydect3300-uk.qxd 14.11.2003 15:58 Seite 51 11. Favorite (special functions) With this menu you can access to several special functions which allow to use your phone as a walkie- talkie, calculator, biorhythm calculator and world clock. ✍ The Favorite menu includes also the SMS features. For information on how to set and use them, see the Chapter 10 11.1 Walkie talkie Two handsets can talk each other like walkie 5.
easydect3300-uk.qxd 14.11.2003 15:58 Seite 52 11.2 Calculator Using this feature, you can use the phone as a cal- 7. To get the result, press the OK soft key. culator. You can perform calculations including addition, subtraction, multiplication and division 8. Repeat Steps 5 through 7 every time you want on your phone.
easydect3300-uk.qxd 14.11.2003 15:59 Seite 53 11.3 Biorhythm calculator The theory of biorhythms is a pseudoscientific 7. The phone will automatically return to Standby theory that claims our daily lives are significantly mode after 30 seconds of the last key pressed. affected by rhythmic cycles overlooked by scien- If you want to do that earlier press the right tists who study biological rhythms.
easydect3300-uk.qxd 14.11.2003 15:59 Seite 54 11.4 World time World time allows you to watch the current date/ti- 5. Press repeatedly the navigation keys me in every part of the world. to select the time zone you need to watch with its information. 1.
Seite 170
easydect3300-uk.qxd 14.11.2003 15:59 Seite 55 13. Troubleshooting Symptom Possible cause Solution The handset doesn’t switch on Battery discharged or not (well) in- Try charging the handset for few minutes, stalled. then remove it from the base. If it still doesn’t switch on, check the battery installation (ref.