Herunterladen Diese Seite drucken

GRAUPNER TERRY S Bauanleitung Seite 19

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Please note that in the Ready-for-Radio version, order no. 6297.100 some building
stages have already been made. The electric motor and the servos C 231 have been
installed, too.
RC accessories
This model should only be flown with an FM radio control system such as the X-306
to mc-24. For more information about RC systems and components please refer to
the main FS catalogue.
The following set is required in order to fly the model:
X-306 FM 35 radio control set*
* This set includes two C 261 servos.
The following items are required to assemble and operate the model:
ULTRAMAT 6 battery charger
LiPo Balancer Plus
Cells for transmitter power supply (8 required)
Transmitter charge lead
Charge lead with BEC connector
Electric motor and accessories
Power set
Order No.
SPEED 400
PLUS 7.4V
6091
Essential tools and adhesives
Balsa knife
Screwdriver
Cyano-acrylate glue
Cyano activator
Side-cutters, Mini flat-nose pliers, Paper scissors
Building instructions
Please read right through these building instructions before you start construction, so
that you gain a general understanding of the sequence of events. Before you start
work on a particular stage, lay out the parts required together with the tools and
adhesives. The components should be prepared as described in the instructions.
You will need a smooth, completely flat surface for assembling the model; a layer of
foam on the building board will help to prevent damage to the foam surfaces. Use
cyano-acrylate glue ("cyano") with activator as adhesive for all joints unless stated
otherwise. Joints are best made by applying cyano to one surface, and spraying the
mating surface with activator. Please take particular care to avoid cyano getting onto
your hands and the surfaces of the model.
Caution: cyano-acrylate adhesives must not be allowed to come into contact
with any part of your body, and in particular not with the eyes. We therefore
recommend that you wear protective goggles.
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler!
Flight battery
Order No.
GRAUPNER LiPo
2/800
7.4 V / 800 mAh
7623.2BEC
Order No. 4708.261.2
Order No. 6409
Order No. 3064
Order No. 98866
Order No. 3022
Order No. 3037
Order No. 980
Order No. 810
Order No. 5821
Order No. 953.150
Id.-Nr. 0058674
03/2008
19

Werbung

loading