Assembly - Silvercrest SGR 150 A1 Bedienungsanleitung

Assembly

GB
8
1) Place the drum housing
the opened lock .
2) Turn the drum housing
upwards and the arrow points to the closed lock . The drum housing 0
engages and is fi rmly seated.
3) Open the storage compartment
6 q.
4) Fit the required drum
housing 0 and rotate it slightly clockwise so that it is securely seated.
WARNING! RISK OF INJURY!
Exercise caution in your interaction with the drums 3 4 5 6
q. The blades are very sharp!
!
NOTICE
► When you wish to remove the drum, rotate the drum housing
it, together with the fi tted drum, loosens itself from the motor block. Then
remove the drum from the drum housing 0. Fit the drum housing 0 as de-
scribed above back onto the motor block and insert the desired new drum.
5) Insert the plug into a mains power socket.
The appliance is now ready for use.
NOTICE
► The drums which you do not need can, to save space and always have
handy, be stacked in the storage compartment 7. Press the lid of the storage
compartment 2 down a little at the markings
it backwards. The lid 2 can now be lifted off . When re-attaching the lid 2
ensure that the restraints grip in the holes provided on the appliance.
0 on the motor block such that the arrow points to
0 anti-clockwise, so that the fi lling shaft w faces
7 and extract the required drum 3 4 5
3 4 5 6 q onto the drive shaft 9 in the drum
0 so far that
and simultaneously pull
SGR 150 A1