38
|
5.
Beschreibung
5.1
EC- Technik
EC technology is based on the optimum utilisation of the motors which are controlled by the integrated electro-
nic. The electronic avoids slippage losses and ensures that the motor is constantly adjusted to optimal operation. In
addition, the control electronics ensure that the proportion of effectively used energy is much higher compared to AC
motors. EC fans stand out thanks to their effi cient use of energy and their outstanding adjustability. The speed of the
fans can be freely adjusted to meet ventilation requirements. The fans also operate very effi ciently. This means that
they use far less energy than AC drives, whilst providing the same air performance. Furthermore, EC motors can save
energy both in partial and full-load operation. They lose less of their effi ciency in partial-load operation than asyn-
chronous motors of the same power.
5.2
Characteristics
The MUB CAV/VAV with the integrated controller offers you the possibility for a constant airflow (factory setting) or
constant pressure ventilation. The following operating modes are possible to adjust with the controller (for further
information for adjustment of the controller, please take the attached operating manual of the controller):
•
CAV --> Constant Air Volume
•
VAV --> Variable Air Volume
•
display data
5.2.1
General
•
100% controllable
•
Multifunktional use
•
low sound level
•
Modular system for individual supply and extract air solutions
•
Reliable and easy to maintain.
•
Backwards- curved, free-running, rotors made from aluminium
•
Outlet direction can be modified on site 90°/180°
5.2.2
Motors
•
EC- Motor mit hohem Wirkungsgrad
•
Eingangsspannung 1- Phasen 200...277V / 3- Phasen 380...480V
•
Motoren für 50Hz und 60Hz geeignet
•
Leistungselektronik im Motorgehäuse
•
Integrierter Motorschutz
5.2.3
Housing
•
Self-supporting construction
•
Aluminium profi le with encapsulated screw channels
•
Corners made of highly impact-resistant PA6
•
Corrosion-resistant aluminium
•
Thermal decoupling by side panels with tubular rivets
•
Double skin panels of galvanised sheet metal
•
20 mm non-fl ammable glass wool insulation
5.2.4
Optionen
•
Individual solutions/upgratings by Airhandling units (AHU) --> on request
•
Different, based on operating point filter modules, e.g. active carbon or aluminium filter