Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6
OPERATION
6.9
TOWING / TRAILERING _____________________________________________________
If the unit experiences problems and removed from the
f
area, it should be loaded onto a trailer for transport. If a
trailer is not available, the unit can be towed slowly short
distances.
Use care when loading and unloading unit. Fasten unit to
trailer to prevent it from rolling or shifting during transport.
Before towing, open tow valve. The tow valve permits
TRG004
moving the unit without starting the engine and prevents
possible damage to hydraulic components.
A
The tow valve (A) is located on the hydraulic drive pump
under rear hood. To open valve, insert a pin into the small
Figure 6J
hole in the valve stem. Turn the valve counterclockwise
one full turn.
Before towing make sure attachments are raised. If they
cannot be raised, remove them from the unit.
Close valve completely after towing.
NOTE: Do not exceed 1 MPH (1.6 KPH) while towing.
Long distance towing is not recommended.
GB-16
Werbung
Kapitel
Inhaltsverzeichnis
