Accessories - Kärcher HD 600 C Betriebsanleitung

HD 600 / 1000 / 1400 C(H)
Handguns with different spray lances
Dependent on the cleaning application, dif-
ferent spray lance extensions are required,
ranging from 250 mm for one-hand operati-
on to 2040 mm for cleaning high objects.
Nozzles
Several nozzles with different spray angles
are available for the system. The nozzles
are mounted on the spray lance by means
of a union nut, and are easily changed.
Design-
ation
HD 600 C (H) 25036
15060
HD 1000 C(H)
25060
25100
HD 1400 C(H)
2 x 25050
Force of recoil from the handgun when
using these nozzles:
HD 600 C 160 bar
HD 1000 C 150 bar
120 bar
HD 1400 C
2 x 120 bar
The spraying device (i.e., handgun) is con-
nected by means of an in-line quick-cou-
pling.
5.959-490 A 12578 (12/99)
G. Accessories
Spray Order No.
angle 2.883-
25° -821
15° -391
25° -402
-408
25°
2 x -399
28 N
30 N
35 N
2 x 28 N
Accessory kit, Stand
Used for setting up the pump unit when
wall-mounting is not possible for technical
or architectural reasons.
Accessory kit, Softener
As a protection against calcification when
operating in hot-water mode with hard
water. Meters softener into the water. The
metered amount can be adapted to the
degree of hardness of the water.
Cleaning detergents
Cleaning detergents facilitate any cleaning
task. A selection of cleaning agents is listed
in the table on the following page. When
using detergents it is essential to observe
the instructions supplied on the product la-
bels.
The following types of cleaning detergents
must not be used with this system:
•
Detergents containing nitric acid
•
Detergents containing active chlorine
Using these types of detergents will result
in damage to unit components.
English
G1