Switching On The Appliance; Selectingthe Temperature - Bosch KGF Serie Gebrauchsanleitung

en
Switching on
the appliance
Switch on the appliance with the On/Off
button. Fig. 1/2
A warning signal sounds.
Press the alarm off" button. Fig. 2/6
The warning signal switches off.
The factory has recommended and set
the following temperatures:
Refrigerator compartment:
Cool fresh compartment:
Variofreezer compartment:
Operating tips
S The sides of the housing are sometimes
heated slightly. This prevents conden
sation in the area of the door seal.
S If you cannot open the freezer compart
ment door immediately after closing it,
wait 2 3 minutes until the partial
vacuum has equalised.
S The refrigeration system may cause
several areas of the freezer shelves
to frost quickly. This does not affect
function or power consumption. The
appliance does not require defrosting
until the entire surface of the freezer
shelf is covered with more than 5 mm
of frost or ice.
28
Selecting
the temperature
Fig. 2
Fridge
(can be selected from +2 °C to +8 °C)
1. Press selection button 1 until
refrigerator compartment display 2
is activated.
2. Press buttons +/ " 9 until the required
+4 °C
temperature is indicated.
0 °C
Cool fresh compartment
-18 °C
(can be selected from 0 °C to +4 °C).
1. Simultaneously press selection button
1 and  " button 9 for 2 seconds.
Cool fresh" compartment display
is activated.
2. +/ " keep pressing buttons 9 until the
required temperature is indicated.
Variofreezercompartment
(can be set from 4 °C to 18 °C)
1. Press selection button 1 until Vario
freezer compartment display is
activated.
2. +/ " keep pressing buttons 9 until
the required temperature is indicated.