PLEASE WAIT appears again in the display, fol-
lowed by the confirmation message SUCCESS.
14. Troubleshooting
The display remains dark:
•
Check whether the remote control batteries have
been correctly inserted and have matching +/– po-
larity.
•
If the batteries are too weak, replace them with
new ones.
The remote control does not work:
•
Check whether your devices have been properly
connected and are switched on.
There are several device codes listed under the
brand name of my device. How do I determine the
correct device code?
•
To determine the correct device code for your de-
vice, try each consecutive code until most of the
functions of the device function properly.
•
The devices only respond to a few remote control
commands:
•
Continue testing further codes until the devices re-
spond to the commands accordingly.
•
If none of the aforementioned code programming
steps results in success, it might mean that the de-
vice is not compatible with your universal remote
control.
52