Sharp PG-C20XU, PG-C20XE Handbuch Seite 28

PG-C20XU
PG-C20XE
AN-Z7T
No. Adjusting point
20 RGB-related
performance
checking
21 DVD perform-
ance checking
22 Thermistor
performance
checking
23 Auto sync
performance
checking
24 Keystone cor-
rection perform-
ance checking
25 Lamp power
changeover
performance
checking
26 Delivery set-
tings
Adjusting conditions
1. Feed the RGB signal.
1. Receive the 480I signal.
1. Heat the thermistor with a
hair dryer.
1. Feed the phase check pat-
tern signal.
Adjusting procedure
» User adjustment:
Check the performance relating to Contrast, Bright-
ness, Red, Blue, Clock, Phase, H-POS, and V-POS.
» User adjustment:
Check the performance relating to Contrast, Bright-
ness, Color, Tint and Sharpness.
» Make sure that the temperature is indicated.
» In the VGA, SVGA, XGA, and SXGA modes, make
sure the Clock, Phase, H-Pos and V-Pos settings can
be automatically adjusted.
» Make sure that the keystone distortion can be cor-
rected.
» Make sure that the brightness can be changed with
the user lamp power control.
» Make the following settings.
Destination Process adjustment
(Model)
US (XU) S4
Europe (XE) S4
28
Remote control adjustment
Factory setting at 4
Factory setting at 4