EcoSmart XL Series Installationshandbuch Seite 13

ENGLISH
Clearances & Installation
Top Tray
The incorporation of a Top Tray into your setting protects against heat
transference and aids in the collection of accidental spillage. Some
models come with Top Trays, others do not. Top Trays are available as
an accessory through The Fire Company or your local distributor.
If utilising a Top Tray that is not supplied, The Fire Company Pty
Ltd is not liable for any injuries or damages sustained through the
use of Top Trays not manufactured by The Fire Company Pty Ltd;
When installing multiple Burners a maximum of three (3) Burners may be
installed into the one Top Tray (excluding the XL Series which can only
have one (1) Burner per Top Tray). With multiple Burner installations you
should consider the impact of any accident and design the installation
to minimise the impact whenever possible. Contact your local distributor
about design and analysis recommendations in order to consider and
minimise impacts.
Burner cut outs WITH Top Tray
Burner
Top Tray
Cut Out
min depth
[4.5in]
115mm
[12.4in] [12.4in]
315mm 315mm
BK SERIES
Burner
Top Tray
min depth
[4.5in]
Cut Out
115mm
[20.9in]
530mm
[9.1in]
230mm
XL500
www.ecosmartfire.com
min depth
[4.5in]
115mm
[36.6in]
930mm
XL900
Burner
Top Tray
min depth
[3.2in] Cut Out
80mm
[14.2in]
360mm
[8.3in]
210mm
XS340
Top Trays provided by The Fire Company are fitted directly into the
Burner shelf from above. The Burner is then inserted into the Top Tray
setting and sits flush.
The size of the cut-out should not give more than 5mm [0.196in]
clearance. Top Trays must not be more than 200% of the total size of the
corresponding Burner.
Burner
Top Tray
Cut Out
[9.1in]
230mm
XL700
AB8 Burner
AB8 Top Tray
Cut Out
[15.8in]
Ø 400mm
min depth
[6.3in]
160mm
AB8
Burner
Top Tray
min depth
[4.5in] Cut Out
115mm
[28.7in]
730mm
[9.1in]
230mm
AB3 Burner
AB3 Top Tray
Cut Out
[11.0in]
min depth Ø 280mm
[3.9in]
100mm
AB3