Inhaltsverzeichnis
Werbung
TABLE 2 - TABLEAU 2 - TABELLE 2
- TABLA 2 - TAVOLA 2
37
35
50
63
49
48
01
02
03
36
62
83
200
04
52
30
03
34
02
33
74
51
43
44
45
75
205
43
44
45
41
40
38
56
39
55
45
46
54
201
42
12
78
65
79
08
61
77
31
The part reference "B46" includes the following:
– Basic tool complete with battery and shoulder strap.
– Spare battery.
– Battery charger.
– Plastic carrying case "VAL P5".
2. INSTRUCTIONS FOR USE
2.1) Preparation
The tool can be easily carried using
either the handle or the shoulder strap
(T) attached to the rings (R).
With the tool in the rest position pro-
ceed as follows:
– Select the appropriate die set for
13
the connector.
– Open the latch (41) and release the
upper die holder (42).
– Insert one die into the upper die
holder (42) and one die into the
lower die support (49).
For indent crimping, the nest
MA... must be inserted in to the
upper die holder (42), and the
indentor PA... must be inserted
into the lower die support (49).
– Close the latch (41).
– Insert the conductor in the connec-
tor.
– Position the connector between the
dies and ensure the correct location
of the crimp.
Ensure that the latch and the
upper die holder are fully se-
cured, otherwise damage may
occur during tool operation.
2.2) Die advancement
– Press the operating button (10) to activate the motor-pump and advance the lower die.
To halt the advancement, release the operating button (10) and the motor will cut out.
4
(Ref. to Figs. 1, 2, 3 and 4)
(Ref. to Figs. 1, 2)
42
MA ...
FIG. 2
FIG. 3
(Ref. to Fig. 3)
ENGLISH
41
PA ...
49
10
201
Werbung
Inhaltsverzeichnis
