GB
3. CHANNEL
3. 1 .5 Find
1. Press [Blue] button to open the "Find"
window
[CH
character of the channel name and press
[OK] to confirm it.
2. After entering the character(s) highlight
"OK" in the window and press [OK] on the
RCU.
3. Press [Exit] button to close the find window and brings you back to the channel list.
3.2
Radio Channel List
Basically the operation of "Radio Channel List" is same as "TV Channel List", except that in
the small channel window the radio Logo will be displayed.
3.3
Channel Setup
When you enter the "Channel Setup" menu
you will see a screen like beside:
1. Startup Channel: Press [OK] to enter "Star-
tup Channel" menu to see the screen like
showed beside:
• If you set of "Boot on Channel" to "On"
you can edit the following two items.
If the setting is "Off" the box always
starts with the channel that was run-
ning when the box has been switched
off.
• On the "Mode" item you can select
either "TV channel" or "Radio channel".
• On "Startup Channel" item you can open
the channel list by pressing [OK]. Then
you can select the channel of you choice.
Press [OK] again to confirm.
Installation Guide
like
showed
beside.
]/[Vol
] to select the leading
Press
22