Digital Box IMPERIAL DB 2 basic Bedienungsanleitung Seite 70

4. INSTALLATION
• DiSEqC1.0: Use [Vol
DiSEqC1.0 option list to select directly with [CH
• DiSEqC1. 1 : Use [Vol
DiSEqC1.1 option to select directly with [CH
The options of this item are: Disable/CCard1 M1 Port1/CCard1 M1 Port2/
CCard1 M1 Port3/CCard1 M1 Port4/CCard1 M2 Port1/CCard1 M2 Port2/
CCard1 M2 Port3/CCard1 M2 Port4/CCard1 M3 Port1/CCard1 M3
Port2/CCard1 M3 Port3/CCard1 M3 Port4/CCard2 Port1/CCard2 Port2/
CCard2 Port3/CCard2
Port7/CCard2
CCard2 Port12/CCard2 Port13/CCard2 Port14/CCard2 Port15/CCard2
Port16.
• Positioner: Press [Vol
Notice: When you select "DiSEqC1.2 or USALS", "DiSEqC1.0" and "DiSEqC1.1"
items will be disabled.
• Polarity: Press [Vol
• Toneburst: Press [Vol
3. DiSEqC1.0 4Port: Use [Vol
LNB1/LNB2/LNB3/LNB4.
4. TP Index: Us [Vol
list to select directly with [CH
the channel can be found.
5. FTA Only: Press [Vol
channels. If you select "Yes" it will scan free channels only.
6. Scan Channel: Press [Vol
or just radio channels.
7. Scan Mode: You can select "Auto Scan", "Preset Scan" or "NIT Search" to blind scan
preset transponders or network transponders of the selected satellite.
8. Search: Press [OK] to start scanning. In the lower part of the window the progress of
scanning and the found channels are displayed.
] to switch the options or press [OK] to open the
] to switch DiSEqC1.1 option or press [OK] to enter
Port4/CCard2
Port8/CCard2 Port9/CCard2
] to select between "Off/DiSEqC1.2/USALS".
] to switch between "Auto/H/V ".
] to switch this function "On" or "Off".
] to switch the options of DiSEqC1.0. Between Disable/
] to select the desired transponder or press [OK] to open the TP
], press [OK] again to display the TP number where
] to select to scan only free channels or even scrambled
] to select to scan TV + radio channels, or just TV channels
27
], press [OK] to confirm it.
], press [OK] to confirm it.
Port5/CCard2 Port6/CCard2
Port10/CCard2 Port11/
DVB-S Receiver
GB