Digital Box IMPERIAL DB 2 basic Bedienungsanleitung Seite 67

GB
4. INSTALLATION
• LNB Type: Press [Vol
among "Standard", "User" and "Univer-
sal" mode.
For Example: If you use a Dual LNB, then
you should select "User" option in "LNB
Type" and set the correct frequency in
LNB type.
• 22K: Use [Vol
"Off". The 22KHz signal is used in KU
universal LNBs to change between low band and high band.
! Notice:
After choosing LNB type "Universal" you cannot modify 22K.
• DiSEqC1.0: Use [Vol
option list to select directly with [CH
• DiSEqC1. 1 : Use [Vol
EqC1.1 option to select directly with [CH
options of this item are: Disable/CCard1 M1 Port1/CCard1 M1 Port2/
CCard1 M1 Port3/CCard1 M1 Port4/CCard1 M2 Port1/CCard1 M2 Port2/
CCard1 M2 Port3/CCard1 M2 Port4/CCard1 M3 Port1/CCard1 M3
Port2/CCard1 M3 Port3/CCard1 M3 Port4/CCard2 Port1/CCard2 Port2/
CCard2
Port7/CCard2
CCard2
CCard2 Port16.
• Positioner: Press [Vol
! Notice:
When you select "DiSEqC1.2 or USALS", "DiSEqC1.0" and "DiSEqC1.1" items will be
disabled.
• Polarity: Press [Vol
• Toneburst: Press [Vol
5. After you completed your modification, on the "TP Scan" item, press [OK] twice to start
scanning.
Installation Guide
] to switch
] to switch "ON" and
] to switch the options or press [OK] to open the DiSEqC1.0
] to switch DiSEqC1.1 option or press [OK] to enter DiS-
Port3/CCard2 Port4/CCard2
Port8/CCard2
Port12/CCard2
] to select between "Off/DiSEqC1.2/USALS".
] to switch between "Auto/H/V ".
] to switch this function "On" or "Off".
], press [OK] to confirm it.
], press [OK] to confirm it. The
Port5/CCard2
Port9/CCard2
Port13/CCard2
30
Port6/CCard2
Port10/CCard2
Port14/CCard2
Port11/
Port15/