Digital Box IMPERIAL DB 2 basic Bedienungsanleitung Seite 59

GB
5. SYSTEM SETUP
2. Local Time Setting: When you select
"Local Time Setting" and press [OK] then
you will see a window like the one beside:
• GMT Usage: This item is used to set the
time by using the time signal from the
satellite. Press [Vol
setting.
• The "GMT Offset" item is only available
when "GMT Usage" is set to "On".
Press [Vol
value. With every time you press the
button the time offset will be increased/
decreased by half an hour.
• Summer: Press [Vol
• "Date" and "Time" items are only available when the "GMT Usage" is set to "Off".
Press [Vol
directly.
• Time Display: Press [Vol
Note: If the current channel provides the correct time information, you will see the
current time after you entered "Local Time Setting" menu. If the channel doesn't
provide time information, you have to input the date and time information manually.
The most channels support the time signal.
• Press [Exit] to leave the "Time" menu.
3. Sleep Timer: Select "Sleep Timer" item and press [OK] to set the sleep timer. You
will see "Sleep timer OFF/Sleep timer 10/Sleep timer 30/Sleep timer 60/
Sleep timer 90/Sleep timer 120".
If you set a sleep time, the system will change to standby mode after the chosen time
period.
Installation Guide
] to change the
] to set the "GMT Offset"
] to switch this function "On" or "Off".
] to select one item and use number buttons to input time and date
] to switch this function "On" or "Off".
38