Osd Setting - Digital Box IMPERIAL DB 2 basic Bedienungsanleitung

5. SYSTEM SETUP
5.4

OSD Setting

When you select "OSD Setting" you will see a
screen like beside:
1. Subtitle Display: Press [Vol
"Off", "Standard" or "Teletext Subtitle". If the
current channel has subtitle information, it
will be displayed if this function is "Stand-
ard" or "Teletext Subtitle". If this function is
"Off" subtitles won't be displayed.
2. OSD Timeout: This setting determines the duration the info window is displayed on the
screen when you change channels. Press [Vol
seconds.
3. Position: Press [Vol
4. OSD Transparency: With this parameter you can set the transparency of the menus.
Press [Vol ] select the value between 10%, 20%, 30%, 40% and "Off" (means no
transparency function).
5. Load OSD Setting Default: If you want to reset your OSD settings to the default
settings then select this item and press [OK].
6. Press [Exit] button to leave the "OSD Setting" menu.
] to select
] select the position between top and bottom.
39
], to set the time between 1 to 10
DVB-S Receiver
GB