Upgrade By Satellite; Satcodx Auto Programming - Digital Box IMPERIAL DB 2 basic Bedienungsanleitung

GB
6. TOOLS

6.5.2 Upgrade by Satellite

This function can upgrade the software of
your receiver through data sent by a satellite.
At the moment we offer satellite updates only
through ASTRA1 and Hotbird satellites.
1. Select the satellite and TP or input the TP
value and download PID.
2. Then mark "Start" and press [Enter] to
begin the download of the upgrade.
This may need up to 60 minutes. Therefore
we suggest using of this function only if you
don't intent to watch TV during this time.
6.6

SatcoDX Auto Programming

This function is using the tables of the SatcoDX websites to update your channel and
satellite lists. You need a special application which is available on the CD-ROM of the
Tele-Satellite magazine. Install this software on your PC first.
1. Start the SatcoDX application on your PC.
2. Select "SatcoDX Auto Programming" item from the "Tools" menu and press [OK].
The screen will show the message "OK to Proceed".
3. Press [OK] again and you will see the message "Ready to Download".
4. In the PC application set the Baud Rate to 115200 and start the download procedure.
! Caution:
The new download channels will delete the original channels list. Please be careful
before using it.
Installation Guide 46