Single Search - Digital Box IMPERIAL DB 2 basic Bedienungsanleitung

GB
4. INSTALLATION
After selecting the installation menu you can see the window like beside.
In "Installation" menu:
1. Press [CH
among Single Search, Multi Search, TP
Scan, Satellite List, TP List and Satellite
Guide.
2. Press [OK] to enter the selected item.
4. 1

Single Search

After selecting "Single Search" you will see a
window like beside:
1. In the "Satellite" item press [Vol
select the satellite which you want to scan
or press [OK] to open the "satellite list" to
select directly with [CH
to confirm it.
2. LNB Configuration: Press [OK] to enter
LNB configuration, you will see a window
like beside:
• LNB Type: Press [Vol
among
"Universal" mode.
For Example: If you use a Dual LNB, then
you should select "User" option in "LNB
Type" and set the correct frequency in
LNB type.
• 22K: Use [Vol
"Off". The 22KHz signal is used in KU
universal LNBs to change between low
band and high band.
Notice: After choosing LNB type "Universal" you cannot modify 22K.
Installation Guide
] to select menu items
], press [OK]
] to switch
"Standard", "User"
] to switch "ON" and
] to
and
26