Time & Timer Setting - Digital Box IMPERIAL DB 2 basic Bedienungsanleitung

GB
5. SYSTEM SETUP
5.3 Time & Timer Setting
When you enter "Time & Timer Setting" a menu with this 3 items will be opened.
1. Timer: Select "Timer" item and press [OK]
to enter the "Timer" menu.
You can press [CH
• The current time will be displayed in the
first column. If the current time is incor-
rect, please modify it with the [Number]
buttons.
• Timer Number: You can press
[Vol
There are totally 8 timers.
• Timer Mode: Select how often the timer is running: Once, Daily, Weekly, Monthly and
Yearly, or switch the timer to off.
• Timer Service: Select between TV Channel, Radio Channel and Message.
• When you select "TV Channel/Radio
Channel" (timer setting for channel
change and Wakeup channel/date)
then you have further options you need
to set:
• Wakeup Channel: Press [OK] to
enter the channel list, and select the
channel you want to see with
[CH
• Wakeup Date: Use number buttons to input your wakeup date.
• On Time: Use number buttons to input your wakeup time. If date and time are
reached then no matter if the system is in standby mode or in playing mode, it will
automatically switch to the channel you set and start to play.
• Duration: Here you can set the time you want to see or play this channel. After the
time set the system will automatically switch to standby mode. If you don't want
the box the be switched to standby mode then set the duration to 00:00.
Installation Guide
] to select item.
] to switch the timer number.
], press [OK] to confirm it.
36