Multi Search - Digital Box IMPERIAL DB 2 basic Bedienungsanleitung

GB
4. INSTALLATION
4.2

Multi Search

When you enter the "Multi Search" menu a
window like the one beside will open.
1. In the "Satellite" item press [Vol
select the satellite which you want to scan
or press [OK] to open the "satellite list" to
select directly with [CH
[OK] to mark/unmark and [MENU] to
finish the selection. You can select several
satellites in this menu. The system will use
DiSEqC1.0/1.1, DiSEqC1.2 and USALS
functions to search the marked satellites
and scan channels.
2. On "FTA Only" item, pres [Vol
free channels. If you select "Yes", it will scan free channels only.
3. On "Scan Channel" item, press [Vol
channels, only TV channels or only radio channels.
4. On "Scan Mode" item, you can select "Auto Scan", "Preset Scan" or "NIT Search" to
blind scan preset transponders or network transponders of the selected satellite.
5. Select "Search" and press [OK] to start scanning. In the lower part of the window the
progress of scanning and the found channels are displayed.
6. Press [Menu/Exit] to cancel or finish the scanning and saving the found channels.
Installation Guide
] to
], and press
] to select scanning of all channels or just scanning of
] to select the scanning range from TV + radio
28