Paper Specifications; Recommended Paper - Citizen CBM-272 Benutzerhandbuch

2.3 Paper Specifications

2.3.1 Recommended Paper

• Type
• Paper width
• Paper thickness
• Roll diameter
• Printing surface
• Recommended paper : TF50KS-E2C (Monochrome) made by NIPPON PAPER or
• Core
CAUTION:
• Use of non-specified paper may cause irregularity of print density. If this is the case,
use the DIP switch to reset print density. (See 5. DIP SWITCH SETTING)
• Do not paste the paper to the core.
• If the paper comes in contact with a chemical or oil, it may discolor or lose a record.
• Do not rub the paper surface strongly with a nail or hard metal. It may discolor.
• Discoloring starts at about 70°C. Watch out for effects of heat, humidity, light, and
so on.
: Thermal paper
: 58 + 0/– 1 mm
: 60~75µm
: ø83 mm or less
: Outside of the roll (Surface)
its equivalent 735 FA (2-color, Black based) made by
RICOH or its equivalent PB670 (2-color, Red based)
made by MITSUBISHI PAPER or its equivalent
: ø12 mm (Inner dia.), (18 mm øOuter dia.)
— 6 —