Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
Using the MEMO memory function
All IR receivers of the ABB remote control IR system
possess two memories: M1 and M2. These can be
changed and called individually.
• Calling:
• Changing:
Note
It is possible to store different brightness levels for
the address ranges "1 - 5" and "6 - 10" for each of
the keys M1 and M2.
Address range switching
Switching OFF: Press the red key "ALL OFF":
Notes
Several IR receivers may have the same address.
These receivers should lie in the IR transmit (visible)
range (Fig. 3), particularly if you would like to operate
several IR receivers in an address range.
The IR transmit range may change as a result of
reflection.
Press key M1 (or M2):
- The stored brightness levels are
set for all IR receivers in the se-
lected address range independent-
ly of the current brightness level
Press key "ON/OFF":
- Set all IR receivers of an address
range to the desired brightness level
Press MEMO key
Press key M1 (or M2):
- The previously set brightness levels
of all IR receivers in this address
range are now stored
- All IR receivers of the selected
address range are switched off
- The last-set brightness level is
remembered in the case of IR
dimmers
GB
Werbung
