Intende Use - VOLTCRAFT KBM-100 Bedienungsanleitung

4. INTENDED USE
The product is used to measure pH-value, ORP (measuring probe not enclosed, can be
ordered separately), conductivity, TDS and salinity of powered-down, inflammable and non-
corrosive liquids.
The area of use covers the domestic area as well as (fishing) ponds, swimming pools,
photolabs, schools, gardeners, etc. The meter is not suitable for use in the industrial area (e.g.
Galvano technology).
Automatic temperature compensation ("ATC") ensures stable measured values even at
fluctuating temperatures.
Operation takes place with four batteries type AAA/micro.
The safety notes and all other information in these operating instructions always have to be
observed. Keep these operating instructions. Only pass on the device to any third parties
together with these operating instructions.
Any other use than that described above is not permitted and will damage the product. Ad-
ditionally, this is connected to dangers, such as short circuit, fire, etc.
This product complies with the statutory national and European requirements.
22