End Of Operation - VOLTCRAFT KBM-100 Bedienungsanleitung

g) End of operation
The pH electrode must always be kept moist to be able to deliver accurate measuring results
for a long period of time. The same applies to the ORP electrode.
If a small amount of liquid is in the protective cap of the pH electrode at delivery
because of this, this is normal. If no liquid is visible, you need to fill it into the protective
cap after initial commissioning.
For this, add a little bit of the enclosed storage solution into the protective cap and
screw the protective cap onto the pH-electrode. The pH electrode must not dry out
anymore after initial commissioning.
The same applies to the ORP electrode (not enclosed, can be ordered as an acces-
sory).
Observe that the protective flap with the storage solution in it does not tip over. If this
has happened, wipe off the liquid with an absorbent cloth and put the cloth into the regu-
lar household waste. Wash your hands with water and soap carefully.
30