Inhaltsverzeichnis
Werbung
Installation
Installation location
Install the appliance in a dry, ventilated
room. The installation location should
neither be exposed to direct sunlight nor
near a heat source, e.g. a cooker,
radiator, etc. If installation next to a heat
source is unavoidable, use a suitable
insulating plate.
Observe the following minimum distances
to a heat source:
S 3 cm to an electric cooker
S 30 cm to an oil or solid fuel cooker.
Aligning the appliance
The appliance must stand firmly on
the floor and must be level. If the floor
is uneven, use the two front height
adjustable feet.
SW 22
Observe ambient
temperature and
ventilation
The climatic class can be found on the
rating plate (Fig. 0) and indicates the
ambient temperatures at which the
appliance can be operated.
Climatic class
SN
N
ST
T
Ventilation
Fig. 3
Ensure that air circulates around the
appliance.
If the refrigerator is placed in a recess,
there must be a gap of 25 cm above
the refrigerator and at least a 5 cm gap
between the refrigerator and the wall.
en
Permitted ambient
temperature
+10 C to 32 C
+16 C to 32 C
+18 C to 38 C
+18 C to 43 C
21
Werbung
Inhaltsverzeichnis
