Use And Operation; Controls And Functions; Cleaning And Care - Klarstein 10030979 Bedienungsanleitung

Press a button on the device to activate one of the following functions:
• Press the [+] button to set on of 6 speed levels of the air circulation.
• Press the Time button and use the [+] and [-] buttons to set the time. When the fan is running, press the
timer button to turn off the fan after 0.5 to 12 hours. In Standby Mode, you can preset a start time of 0.5-12
hours.
• Press the Mode button to select normal, natural and sleep wind.
• Press the oscillating button to start or stop the swing function.
1 Control panel
2 ON/OFF
3 Display window
4 Timer
5 Normal wind
6 Sleep wind
7 Swing
8 Natural wind
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified service personnel if
service is needed.
1. Before cleaning and assembling, fan must be unplugged.
2. To ensure adequate air circulation to the motor, keep vents at the rear of the motor free of dust. Do not
disassemble the fan to remove dust.
3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.
4. Do not use any abrasive detergent or solvents to avoid scratching the surface. Do not use any of the follow-
ing as a cleaner: gasoline, thinner, bending.
5. Do not allow water or any other liquid into the motor housing or interior parts.

Use and Operation

Controls and Functions

Cleaning and Care

10