Use And Operation - Klarstein 10031879 Bedienungsanleitung

USE AND OPERATION

If use the appliance for first time, please clean up the water tank before use. Always
unplug from the plug socket and allow to cool down before cleaning, The surface of the
water tank is wiped over with damp cloth and polished with a soft dry cloth, And fill in
the clean water to clean, repeat the same steps for several times, then refill the proper
clean water to be ready for operation.
Quick Start Guide
1 Press the Lock button about 3 to 5 second to release by finger
2 Press Temp button to choose 100 degree setting
3 Press Vol. button to choose 000 volume setting
4 Operate the appliance 1 minute or so.
Fill in water
Open the lid, fill the water tank with the desired amount of water, and then close the lid.
Note: the water level must be less the Max level.
Obtain desired water
1 Make sure the plug is connected to the proper wall outlet, and fill in the water with
desired amount.
2 Place your cup on the removable water tray, make sure it aligns with the spout.
3 First press the LOCK button about 3-5 seconds to open by finger, TEMP and VOL.
setting indicator lights up, and press the TEMP button to choose your desired
temperature and press the VOL. button to set right water volume, Last press the ON
button to operate the appliance
4 About 5-10s, the desired water will flow out continuously from water spout, when
you obtain desired water, press the OFF button, the appliance stop work at once, If
you want to obtain water again, only repeat the above procedure.
EN
13