General; Designated Use - Selve commeo Receive Connect Betriebsanleitung

General

2. General
The commeo Receive Connect converts radio signals into control
signals.
The receiver can be used for roller shutters, awnings and blinds. The
receiver will be dispatched in the mode for blinds.
The electrical connections are made exclusively by special plug
connectors.The mains supply (230V) is made by the STAK3 coupling,
the connection of the motor is made by the STAS3 plug. The plug
connections will be secured using the suitable STASI securing clip.
A securing clip is included.

2.1. Designated use

The commeo Receive Connect may be used to control roller shutter,
awning and venetian blind systems only.
• Please note that radio sets cannot be operated in areas with in-
creased risk of interference (e. g. hospitals, airports).
• The remote control is only permitted for equipment and systems
with which a malfunction in the hand-held transmitter or receiver
does not present a risk to persons, animals or objects, or this risk
is covered by other safety devices.
• The operator does not enjoy any protection from disturbances by
other remote signalling equipment and terminal equipment.
31
GB
GB