Switching On, Initialization - sylvac ISP091201D Bedienungsanleitung

3. Maintenance
Keep the micrometer in a dry environment when not using it for a longer period of time to avoid rust formation
of the metallic parts.
Do not close the measuring spindle with the anvil when not in use. Keep a distance of 1-2 mm.
Do not use aggressive products (alcohol, trichloroethylene or others) to clean the plastic parts. Do not keep the
micrometer in places which are exposed to sun, heat or humidity.
Important : dry carefully all metal parts of the instrument after effect of moisture to guarantee a perfect mecha-
nical functioning and to avoid rust formation.

4. Switching ON, initialization

After having pressed on a button, introduced the measuring unit, the instrument shows «SET» for the ini-
tialization of the reference point. Bring back the measuring spindle on the anvil (or on a Gauge block). Press
then [SET] or [MODE]. The instrument is now ready (Check the Preset)
10