H) Expanded Settings - Renkforce GM177 Bedienungsanleitung

h) Expanded Settings

Inversion of the rotating movement
• In the menu, select ADVA and push the ENTER (7) button.
• Select the item Pan Invert with the UP (5) and DOWN (6) buttons.
• Press the ENTER (7) button to set the desired operating mode:
OFF = Normal rotating movement
ON = Rotating movement is inverted
Inversion of the swivel movement
• In the menu, select ADVA and push the ENTER (7) button.
• Select the item Tilt Invert with the UP (5) and DOWN (6) buttons.
• Press the ENTER (7) button to set the desired operating mode:
OFF = Normal swivel movement
ON = Swivel movement is inverted
PAN turning angle
• This item is in the menu ADVA and does not need to be set.
• The maximum rotating angle is set firmly to 540°.
Input of an offset for the PAN position
• In the menu, select ADVA and push the ENTER (7) button.
• Select the item Pan Offset with the UP (5) and DOWN (6) buttons.
• Push the button ENTER (7) and enter the desired offset with the buttons UP (5) and DOWN (6).
• Press the ENTER button (7) to confirm the setting.
DMX Clear
• In the menu, select ADVA and push the ENTER (7) button.
• Select the item DMX Clear with the UP (5) and DOWN (6) buttons.
• Push the button ENTER (7) and select SURE with the button UP (5), to reset the DMX settings. Select NO
with the button DOWN (6), in order to not reset the DMX settings.
• Press the ENTER button (7) to confirm your input.
36