Renkforce GM177 Bedienungsanleitung Seite 32

Menu overview:
Menu Item Option
ADDR 001-512
MODE DMX Ctrl
Auto Run
Sound Ctrl
M/S Choose
Soud Sensitive
TEST PAN
TILT
RED
GREEN
BLUE
WHITE
DISP Screen Saver
Screen Rotation
ADVA Pan Invert
Tilt Invert
Pan Angle
PAN Offset
DMX Clear
System Reset
Factory Setting
STAT Work Mode
Address
Version
Elapse
Total
For a more detailed explanation on the individual menu items, see the following items in these
instructions.
32
Function
Setting the DMX starting address
DMX mode activated
Automatic mode activated
Sound-to-light control activated
Selection of master or slave mode
Setting of the microphone sensitivity
Direct input DMX value for position PAN
Direct input DMX value for position TILT
Direct input DMX value for brightness red
Direct input DMX value for brightness green
Direct input DMX value for brightness blue
Direct input DMX value for brightness white
Mode1 = The display switches off after a few seconds without any
button being pushed
Mode 2 = Simplified display
OFF = Display stays permanently on
Display is turned by 180° (for suspended assembly)
Inversion of the PAN movement direction
Inversion of the TILT movement direction
PAN turning angle (no setting required)
Setting of an offset for the PAN position
Deleting the DMX settings
Performing a reset
Reset to factory setting
Display of the operating mode
Display of the DMX address
Display of the software version
Display of the current operating time
Display of the total operating duration