Omnitronic DJS-1050 Bedienungsanleitung Seite 26

Possibility 3:
In the playback-mode, you can adjust the playback-speed by +/- 100 % via the Scratch-wheel.
6.7 Cueing
Auto-Cue function:
After switching on and after pressing the Track-buttons, the player automatically jumps to the section where
the music starts. This function enable to minimize the transitions between two tracks.
If the Auto Cue-function is disabled, a time interval remains between two tracks until the music starts. If the
Auto Cue-function is activated (the display shows "Auto Cue"), the music starts immediately.
Back-Cue function:
If you press the Cue-button during playback, the player returns to the track-start or Cue-point (In-button) and
goes into Pause-mode. Please note that this function is only available within one track.
Memorizing the Cue-point:
Possibility 1:
The player is in Playback-mode.
Press the In-button and the Cue-point is memorized. The Cue-indicator shortly flashes.
As soon as you press the Cue-button, the player returns the Cue-point and goes into Pause-mode.
Possibility 2:
The player is in Playback-mode.
Press the Play/Pause-button and the player goes into Pause-mode.
Select the Cue-point via the Scratch-wheel. The display shows the selected starting-point (e.g. 3:42 22).
Press the In-button and the Cue-point is memorized. The Cue-indicator shortly flashes.
As soon as you press the Cue-button, the player returns the Cue-point and goes into Pause-mode.
Possibility 3:
The player is in Pause-mode or in Playback-mode.
Press the Track-button to select the desired track. The Cue-indicator shortly flashes and the Cue-point is set
to the track-start.
Memorizing several Cue-points:
With the DJS-1050, you can memorize up to 4 different Cue-points of different tracks and recall them via the
Bank-button or the Cue-button, respectively.
Hold the Sampler/Memory -button and press the desired Bank-button in order to memorize the current Cue-
point on the Bank-button.
By pressing the respective Bank-button, you can recall the Cue-points memorized via the Sampler/Memory-
button. The last memorized Cue-point can be recalled by pressing the Cue-button.
The memorized Cue-points can be overritten at any time. Please note that the Cue-points can only be
deleted by switching the CD-player off an on again.
You can recall all memorized Cue-points from up to 127 CDs after switching the CD-player off. Therefore,
you have to switch the CD-player on, hold the Sampler/Memory-button and insert the respective CD. The
display shows "Recall" until the loading process is finished.
6.8 Interactive scratch-wheel
With the Scratch-button, you can activate the Scratch-function.
Pitch Bend-function
Please refer to the explanations under 6.6 Adjusting the playback-speed.
Vinyl Cue-function:
The DJS-1050 features a Vinyl Cue-function for searching Cue-points like with a turntable.
Realtime programming of the Cue-points or Loop-points, respectively:
The player is in Playback-mode.
Press the Play/Pause-button and the player goes into Pause-mode.
Press the Scratch-button in order to disable the frame-function of the CD-player. The CD-player is now in the
Realtime Cue-mode. Select the Cue-point by turning the Scratch-wheel forwards and backwards. Repeated
26/55 10602297_V_1_0.DOC