Becker Beck-O-Tronic 4 Bedienungsanleitung Seite 23

1
3
1-channel
hand.transmitter
In. order. to. log. off. (delete). the. radio. hand. transmitters,. keep. the. radio. PRG. button.
pressed. down. until. the. BECK-O-TRONIC. 4. switches. back. to. standby. mode.. In. this.
process,.all.of.the.radio.hand.transmitters.previously.logged.on.are.deleted..You.can.
reactivate.them.by.logging.on.again.
Programming.of.the.radio.hand.trans. m itter
1.. Open. the. lid. of. the. BECK-O-TRONIC. 4. by.
2.. Briefly.press.the.radio.PRG.button.at.the.bot-
3.. The. BECK-O-TRONIC. 4. can. be. programmed.
4.. You. can. switch. between. 1-channel. and. 4-
2
5.. Select.desired.mode.and:
.
.
.
A 1-channel radio hand transmitter cannot
be programmed in 4-channel mode.
4
After. the. radio. hand. transmitter. has. been. suc-
cessfully.logged.on,.the.BECK-O-TRONIC.4.auto-
matically.switches.back.to.operating.mode.("op-
eration". status. display. lights. up). and. your. radio.
4-channel
hand. transmitter. is. ready. for. operation.. Accord-
hand.transmitter
ing.to.this.method.you.can.program.a.total.of.fifty.
hand.transmitters.(1-channel.or.4-channel).
6.. Close.the.BECK-O-TRONIC.4.housing.again.
loosening.the.4.lid.screws.and.fasten.it.to.the.
BECK-O-TRONIC.4.hou. s ing.as.in.the.adjacent.
picture.
tom.right.of.the.control.device.
for.1-channel.mode.when.the."operation".sta-
tus.display.(left-hand.lamp).flashes.
channel. programming. mode. by. pressing. the.
radio. PRG. button. again.. Programming. mode.
for. 4-channel. mode. is. signalised. by. all. four.
status.displays.flashing.at.once.
in.1-channel.mode.press.the.desired.button.on.
the.radio.hand.transmitter
or
in.4-channel.mode.press.the."DOWN".button.
on.the.radio.hand.transmitter.
Note
de
en
fr
nl
23