Defrosting; Risk Of Electrical Shock; Replacing Of The Illuminant - Schneider SCD 400 A++ NF IX Bedienungsanleitung

5.1 Defrosting

 The fridge is defrosted automatically.
 The freezer is defrosted automatically (NoFrost).
(optional procedure if encrusted ice should have occurred):
WARNING! Switch off the appliance by turning the thermostat
(depending on model) to position 0 / AUS / OFF and disconnect it from
the mains.
WARNING! To disconnect the appliance from the mains, you must
unplug the appliance or use a cut-off device.
WARNING! Never use any mechanical items, knives or other sharp-
edged objects to remove the encrusted ice. Never use a steam cleaner.

RISK OF ELECTRICAL SHOCK!

1. Remove the contents from the freezing-compartment and put them into a
cooling box.
2. Place a container in front of the appliance to catch the water.
3. When the encrusted ice melts put some dry cloths into the freezer-compartment
to hold the water back.
4. Remove the big pieces of ice first.
5. Afterwards remove the small pieces of ice.
6. Wipe and dry the appliance and door seals with dry and soft cloths.
7. After cleaning leave the door open for some time to ventilate the appliance.

5.2 Replacing of the illuminant

WARNING! The LED-illuminant
person only. If the LED-illuminant is damaged, please contact a qualified
professional.
Depending on model
23
F :
RIDGE
F :
REEZER
F
REEZER
23
must be replaced by a competent
75