Schneider SCD 400 A++ NF IX Bedienungsanleitung Seite 62

3. For the setting of the temperature press the button
"T " (C) repeatedly until the desired temperature is
EMPERATURE
displayed (1).
 After five seconds without using any operating buttons, the set temperature will
be activated and the indicator of the temperature of the fridge (1) stops flashing.
 The temperature changes by 1
"T
EMPERATURE
 If you select the setting "OF", the cooling of the fridge will be switched off.
The temperature of the freezer does not change.
T
HE SEQUENCE OF THE TEMPERATURE SETTING IS
NOTICE! If you select the setting "OF", the cooling of the fridge will be
switched off. In this setting do not leave any food in the fridge.
T
EMPERATURE SETTING OF THE FREEZER
 The adjustable temperature range is from -15
1. If the operating buttons are locked
button (D) for 3 seconds. The operational status indicator of the
key lock (8) goes off. The operating buttons are unlocked.
2. For the selection of the compartment (fridge / freezer) press the
button "R " (A) repeatedly until the indicator of the
OOM
temperature of the
3. For the setting of the temperature press the button
"T " (C) repeatedly until the desired temperature is
EMPERATURE
displayed (2).
 After five seconds without using any operating buttons, the set temperature will
be activated and the indicator of the temperature of the freezer (2) stops
flashing.
0
" (C).
(2) flashes.
FREEZER
C each time you press the button
0 C to -25 0 C.
(8), press the unlock
:
:
62