Defrosting; Risk Of Electrical Shock; Cooling Compartment; Replacing Of The Illuminant - Schneider KG 257.4 A+NF EB Bedienungsanleitung

5.1 Defrosting

WARNING! Switch off the appliance by turning the thermostat
(depending on model) to position 0 / AUS / OFF and disconnect it from
the mains.
WARNING! To disconnect the appliance from the mains, you must
unplug the appliance or use a cut-off device.
WARNING! Never use any mechanical items, knives or other sharp-
edged objects to remove the encrusted ice. Never use a steam cleaner.

RISK OF ELECTRICAL SHOCK!

1. The cooling compartment is equipped with an automatic defrost-system.
2. The water is drained at the back inside the appliance.
3. The water is collected in a container underneath the compressor. The water
evaporates in this container
4. The drain must not be blocked.
5. Clean the drain carefully with a pipe cleaner.
 The freezer is defrosted automatically (NoFrost).
(optional procedure if encrusted ice should have occurred)
1. Remove the contents from the freezing-compartment and put them into a
cooling box.
2. Place a container in front of the appliance to catch the water.
3. When the encrusted ice melts put some dry cloths into the freezer-compartment
to hold the water back.
4. Remove the big pieces of ice first.
5. Afterwards remove the small pieces of ice.
6. Wipe and dry the appliance and door seals with dry and soft cloths.
7. After cleaning leave the door open for some time to ventilate the appliance.

5.2 Replacing of the illuminant

C
OOLING COMPARTMENT
F :
REEZER
F :
REEZER
:
74