Error Codes - Schneider SCD 400 A++ NF IX Bedienungsanleitung

When you operate the appliance for the first time or the temperature falls below
a certain level, the appliance will operate with high power to reach the preset
temperature.
may be generated inside or outside the appliance by high humidity or very warm
ambient temperatures.
You will hear the compressor click if it is activated or deactivated.
is caused by the compressor while running.
may be generated by sequential expansion and shrinkage of the components of
the cooling system. It is caused by variation of temperature before and after the
compressor is activated or deactivated.

6.1 Error codes

If the following error codes are indicated on the display of your appliance,
please contact the customer service.
T
HE FOLLOWING ERROR CODES CAN BE DISPLAYED
E
RROR CODE
UC
RS
CS
FS
FD
FF
FH
Distinct noise
Condensed water in / on the appliance
Clicking
Hum
Knocking / snapping
Communications failure
Sensor failure of the fridge
Sensor failure of the special drawer for beverages / drinks
Sensor failure of the freezer
Failure of the defrosting sensor
Failure of the automatic defrosting system
D
ESCRIPTION
Failure of the fan
:
78