Internal Cleaning; Defrosting; Risk Of Electrical Shock - Schneider SL 300C CB A++NF Bedienungsanleitung

1. Clean the shelves and the inside with warm water and a mild detergent.
2. Use clear water to rinse.
3. Dry the cleaned surfaces with a cloth.
4. Check the water drain and clean it if needed.
 Clean with warm water and a mild, non- acidic detergent. Do not restart the
appliance until the door seals have dried completely.

5.1 Defrosting

 The fridge is defrosted automatically (NoFrost).
 The freezer is defrosted automatically (NoFrost).
(optional procedure if encrusted ice should have occurred):
WARNING! Switch off the appliance by turning the thermostat
(depending on model) to position 0 / AUS / OFF and disconnect it from
the mains.
WARNING! To disconnect the appliance from the mains, you must
unplug the appliance or use a cut-off device.
WARNING! Never use any mechanical items, knives or other sharp-
edged objects to remove the encrusted ice. Never use a steam cleaner.

RISK OF ELECTRICAL SHOCK!

1. Remove the contents from the freezing-compartment and put them into a
cooling box.
2. Place a container in front of the appliance to catch the water.
3. When the encrusted ice melts put some dry cloths into the freezer-compartment
to hold the water back.
4. Remove the big pieces of ice first.
5. Afterwards remove the small pieces of ice.
I
NTERNAL CLEANING
D :
OOR SEALS
F :
RIDGE
F :
REEZER
F
REEZER
:
53