Before Initial Operation - Schneider SCD 400 A++ NF IX Bedienungsanleitung

7
C
RISPER INCL
8
U
PPER FREEZER SHELVES
9
M
IDDLE FREEZER DRAWERS
10
L
OWER FREEZER DRAWERS
11
A
DJUSTABLE FEET

4.2 Before initial operation

WARNING! While unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept away from children and
pets. CHOKING HAZARD! RISK OF INJURY!
NOTICE! Leave the appliance in an upright position for at least 12
hours before you connect it to the mains to ensure, that the oil has
flowed back into the compressor.
NOTICE! If you use the appliance for the first time or the appliance has
been disconnected from the mains for a longer period of time, allow the
appliance to cool down for 3 until 4 hours on medium temperature setting
(s. chapter 4.5
SETTING OF THE TEMPERATURE
or frozen food in the appliance. If you place food in the appliance before
it has reached its normal operating temperature, this foods can thaw and
/ or spoil.
1. Remove all packaging materials.
2. Adjust the feet and clean the appliance (see chapter
).
MAINTENANCE
3. Do not start the appliance immediately after installation. Wait at least 12 hours
to ensure proper operation.
4. The settings of the temperature of both the fridge and freezer can be adjusted
manually by pressing the relevant buttons until the desired values will be
indicated (s. chapter 4.5 S
. -
BREAK PROOF GLASS COVER
F :
REEZER
ETTING OF THE TEMPERATURE
) before you place any fresh
CLEANING AND
).
57