Schneider SCD 400 A++ NF IX Bedienungsanleitung Seite 65

 The automatic temperature setting of the
ambient temperature and the internal temperature of the appliance.
 According to the current ambient temperature and internal temperature of
the appliance the automatically set temperature of the fridge in the
is from +4
MODE
 According to the current ambient temperature and internal temperature of
the appliance the automatically set temperature of the freezer in the
is from - 17
MODE
1. If the operating buttons are locked
seconds. The operational status indicator of the key lock
operating buttons are unlocked.
2. Press the button "Function" (B) repeatedly until the operational status
indicator of the
SMART MODE
3. After five seconds without using any operating buttons, the
be activated and the operational status indicator of the
lights permanently.
 If you want to stop the
the fridge and / or freezer (s. chapter 4.5 S
set another mode.
 The operational status indicator of the
The
FRAPPE MODE
 For this purpose the cooling compartment of the appliance is equipped with a
special drawer for beverages / drinks (6 / s. chapter 4.1 D
).
APPLIANCE
 Place the beverages / drinks to be cooled into the special drawer of the fridge
and close the drawer properly.
0 C to +7 0 C.
0 C to - 18 0 C.
H
OW TO SET THE SMART MODE
(4) flashes.
H
OW TO STOP THE SMART MODE
, you have to change the temperature of
SMART MODE
F M
RAPPE
is suitable to cool beverages / drinks quickly and easily.
depends on the current
SMART MODE
:
(8), press the unlock button (D) for 3
SMART MODE
:
ETTING OF THE TEMPERATURE
(4) goes off.
SMART MODE
(I )
ODE CE DRINK
ESCRIPTION OF THE
SMART
SMART
(8) goes off. The
will
SMART MODE
(4)
) or
65