Key Lock; Setting Of The Temperature - Schneider SCD 400 A++ NF IX Bedienungsanleitung

8
O
Button "R
A
OF THE COMPARTMENT
B
Button "F
Button "T
C
fridge or freezer.
D
U
NLOCK BUTTON

4.4 Key lock

 The appliance is equipped with a
1. The operating buttons of the display will be locked automatically after each
operation.
2. The operational status indicator of the key lock
3. Press the unlock button (D) for 3 seconds to unlock the operating buttons.
4. The operational status indicator of the key lock
5. The operating buttons are unlocked.
Before you can carry out settings of the temperatures or modes you always have
to press the unlock button (D) for 3 seconds to unlock the operating buttons.
If the
KEY LOCK
carried out.

4.5 Setting of the temperature

Operational status indicator of the activated key lock
(L )
OCKED
PERATING BUTTONS OF THE DISPLAY
" for the selection of the fridge or freezer (
OOM
for the setting of the temperature).
" for the selection of the different
UNCTION
" for the setting of the temperature of the
EMPERATURE
to unlock the operating buttons.
KEY LOCK
is activated, none of the following settings below can be
:
MODES
.
(8) goes on.
(8) goes off.
SELECTION
.
60