Before Initial Operation - Schneider SL 300C CB A++NF Bedienungsanleitung

7
Cover / crisper
9
Freezer drawer
11
Freezer drawer
13
Gasket/refrigerator
15
Bottle pocket
17
Handle
19
Door / freezer

4.2 Before initial operation

WARNING! While unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept away from children and
pets. CHOKING HAZARD! RISK OF INJURY!
NOTICE! Leave the appliance in an upright position for at least 4-6
hours before you connect it to the mains to ensure, that the oil has
flowed back into the compressor.
NOTICE! If you use the appliance for the first time or the appliance has
been disconnected from the mains for a longer period of time, allow the
appliance to cool down for 3 until 4 hours on medium temperature setting
(s. chapter 4.3
SETTING OF THE TEMPERATURE
or frozen food in the appliance. If you place food in the appliance before
it has reached its normal operating temperature, this foods can thaw and
/ or spoil.
1. Clean the appliance thoroughly. Be very careful especially inside the appliance.
2. After having installed the appliance wait 4-6 hours before you connect it
to the mains.
3. Afterwards operate the appliance after 24 hours for the first time.
4. The temperature of the freezer should reach -18
the exact temperature of the cooling and freezer compartments using a suitable
10
thermometer .
10
Not included in delivery
8
Crisper
10
Freezer drawer
12
Left front foot
14
Door trays
16
Door / refrigerator
18
Gasket / freezer
20
Right front foot
) before you place any fresh
0
C or colder. You can check
44