Before Initial Operation; Temperature Setting - Schneider SL 300C-CB A++ NF Bedienungsanleitung

4.1 Before initial operation

1. Clean the appliance thoroughly. Be very careful especially inside the appliance.
2. After having installed the appliance wait 4-6 hours before you connect it
to the mains.
3. Set the thermostat to position 3 or 4.
4. Afterwards operate the appliance after 24 hours for the first time.
5. The temperature of the freezer should reach -18
the exact temperature of the cooling and freezer compartments using a suitable
thermometer 7 .
WARNING THE THERMOSTAT CONTROLS THE COMPRESSOR
ONLY. You must unplug the appliance to disconnect it from the mains.

4.2 Temperature setting

When the appliance is powered on for the first time, the backlighting of the icons
on the display starts working. If no buttons have been pressed and the doors are
closed, the backlighting will turn off.
Not included in delivery
7
C or colder. You can check
0
32