Herunterladen Inhalt Inhalt Diese Seite drucken

Y-Kabel - Tunze SmartController 7000 Gebrauchsanleitung

Kontrolgeraet fuer aquarium
Vorschau ausblenden Andere Handbücher für SmartController 7000:
Inhaltsverzeichnis

Werbung

24V
12V
9b
9a
16

Y-Kabel

Mit dem Y-Kabel 7090.300 (6) kann an einer Buchse ein
weiteres Gerät angeschlossen werden. So können an
einer Buchse (c) zwei verschiedene Geräte gleichzeitig
gesteuert werden, z.B. eine Turbelle
Pumpe und eine
®
TUNZE
LED 8850 (7). Alternativ können auch zwei
®
Pumpen (8) oder zwei LEDs 8850 (9) an einer Buchse
betrieben werden. Mit 4 Y-Kabeln können somit 8
Turbelle
Pumpen oder 8 TUNZE
LEDs 8850 am
®
®
SmartController 7000 angeschlossen werden (5).
Vorsicht! Bei Verwendung eines Y-Kabels können
nur identische dimmbare LED-Leuchten mit gleicher
Spannung angeschlossen werden wie z.B. 2 x 8850.000
mit 24 V (9a) oder 2 x 8810.000 / 8820.000 / 8830.000
mit 12 V (9b). Eine Kombination dieser beiden Leuchten
zerstört die 12V-Leuchte!
Y-cable
With the Y-cable 7090.300 (6), a further device can
be connected to a socket. Through this, two different
devices can be simultaneously controlled on a single
socket (c), for example, a Turbelle
pump and a TUNZE
®
LED 8850 (7). Alternatively, two pumps (8) or two LEDs
8850 (9) can also be operated on a single socket. With 4
Y-cables it is thus possible to connect 8 Turbelle
or 8 TUNZE
LEDs 8850 to the SmartController 7000
®
(5).
Caution! When using a Y-cable it is only possible to
connect identical dimming LED lights with the same
voltage, for example, 2 x 8850.000 with 24 V (9a), or
2x 8810.000 / 8820.000 / 8830.000 with 12 V (9b). A
combination of these two lamps will destroy the 12 V
lamp!
Câble adaptateur Y
Le câble adaptateur Y 7090.300 (6) permet de raccorder
un deuxième appareil sur sa sortie. Ainsi il est possible
de commander deux appareils différents sur une même
sortie (c) comme par exemple une pompe Turbelle
®
une LED 8850 de TUNZE
(7). Mais cela pourrait aussi
®
être deux pompes (8) ou deux LED 8850 (9) sur une
pumps
même sortie. Avec 4 câbles adaptateur Y, il est possible
®
de commander 8 pompes Turbelle
TUNZE
sur le SmartController 7000 (5).
®
Attention! Lors de l'utilisation d'un câble adaptateur Y,
il n'est possible de commander que des LED identiques
au niveau de l'alimentation secteur comme par exemple
2 x 8850.000 en 24 V (9a) ou 2 x 8810.000 / 8820.000 /
8830.000 en 12 V (9b). La combinaison des luminaires
entre eux détruirait les versions en 12 V!
et
®
ou 8 LED 8850 de
®
17

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis