Tuning Automatically; Receiving A Station Through A List - List; Rds; Overview - Sony CDX-M7850 Bedienungsanleitung

Tuning automatically

1
Select the band, then press (ENTER)
repeatedly until "SEEK" appears, then
rotate the SEEK control dial to search
for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Tip
If you know the frequency of the station you want to
listen to, press (ENTER) repeatedly until "MANUAL"
appears, then rotate the SEEK control dial until the
desired frequency appears.
Receiving a station through a list
— LIST
You can list up the frequency. For details on
labelling a station, see page 13.
1
Select the band, then press (MENU).
2
Rotate the SEEK control dial until
"List" appears, then press (ENTER).
The frequency appears.
3
Rotate the SEEK dial until the desired
station appears.
4
Press (ENTER) to receive the station.
The display returns to normal reception
mode.
With the card remote commander
Select the band, then press (LIST). Press M or m
repeatedly until the desired station appears, then
press (ENTER).

RDS

Overview

FM stations with Radio Data System (RDS)
service send inaudible digital information along
with the regular radio programme signal.
Display items
Example: when you select the normal play mode
by pressing (IMAGE) repeatedly (page 7).
A
C
A Radio band, Function
B Clock* 1
C Preset number
D Frequency* 2 (Station name), RDS data
E TA/TP* 3
*1 When clock mode is set to "on" (page 12).
*2 While receiving the RDS station, " *" is displayed
on the left of the frequency indication.
*3 "TA" flashes during traffic information. "TP" lights
up while such a station is received.
To change display items D, press (DSPL) on the
card remote commander.
RDS services
This unit automatically provides RDS services as
follows:
AF (Alternative Frequencies)
Selects and retunes the station with the
strongest signal in a network. By using this
function, you can continuously listen to the
same programme during a long-distance drive
without having to retune the same station
manually.
TA (Traffic Announcement)/TP (Traffic
Programme)
Provides current traffic information/
programmes. Any information/programme
received, will interrupt the currently selected
source.
PTY (Programme Types)
Displays the currently received programme
type. Also searches your selected programme
type.
CT (Clock Time)
The CT data from the RDS transmission sets
the clock.
Notes
• Depending on the country/region, not all RDS
functions may be available.
• RDS will not work if the signal strength is too weak,
or if the station you are tuned to is not transmitting
RDS data.
continue to next page t
B
D E
9