Rotary Commander Rm-X4S; Auxiliary Audio Equipment - Sony CDX-M7850 Bedienungsanleitung

The name is deleted, and "Continue" appears
if the other names are stored. If you want to
delete other names, rotate the SEEK control
dial to select "YES," then repeat steps 4 to 6.
7 Press (MENU).
The unit returns to normal play mode.
With the card remote commander
In steps 2 to 4: press M or m instead of the SEEK
control dial; in step 6: press < or , instead of the
SEEK control dial.
Locating a disc by name — LIST
You can select a disc from the list when
connecting a CD changer with the CUSTOM
FILE function or an MD changer.
If you assign a name to a disc, the name appears
on the list. For details on labelling a disc, see
page 13.
1 During playback, press (MENU).
2 Rotate the SEEK control dial until "List"
appears, then press (ENTER).
The disc number or disc name appears.
3 Rotate the SEEK control dial until the desired
disc appears.
4 Press (ENTER) to play the disc.
The display returns to normal play mode.
With the card remote commander
During playback, press (LIST). Press M or m
repeatedly until the desired disc appears, then press
(ENTER).

Rotary commander RM-X4S

Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
SO U N D
M O D E
D SP L
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on this unit or the card remote commander.
SOUND
PRESET/
DISC
SOURCE
14
VOL
D S P L
M O D E
S O U N D
ATT
MODE
DSPL
OFF
SEEK/AMS
The following controls on the rotary commander
require a different operation from the unit.
• PRESET/DISC control
To control radio/CD, the same as M or m on
card remote commander (push in and rotate).
• VOL (volume) control
The same as the volume control dial on the unit
(rotate).
• SEEK/AMS control
To control radio/CD, the same as < or , on
card remote commander (rotate, or rotate and
hold).
Changing the operative direction
The operative direction of the controls is factory-
set as shown below.
To increase
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
1 While pushing the VOL control, press and
hold (SOUND).

Auxiliary audio equipment

You can connect optional Sony portable devices
to the BUS AUDIO IN/AUX IN terminal on the
unit. If the changer or other device is not
connected to the terminal, the unit allows you to
listen to the portable device on your car speakers.
Note
When connecting a portable device, be sure BUS
CONTROL IN is not connected. If a device is
connected to BUS CONTROL IN, "AUX" cannot be
selected with (SOURCE).
Tip
When connecting both a portable device and a
changer, use the optional AUX-IN selector.
Selecting auxiliary equipment
1 Press (SOURCE) repeatedly until "AUX"
appears.
Operate by the portable device itself.
To adjust the volume level of auxiliary
equipment, see "AUX Level" on page 12.
To decrease