Remote Control Handset - T+A Power Plant E-Series Betriebsanleitung

Remote control handset

If a T+A Music Player or CD Player is present in your system, the
POWER PLANT can be controlled using the F100 remote control of the player
via the E control interface.
LINK
If no Music Player oder CD-Player is present, an optional remote control set
FBS100 can be obtained from your T+A dealer.
The following table shows the remote control buttons and their functions
when controlling the unit.
Table: The amplifier functions of the F100 remote control
   
Switches system on and off
Direct source select button, if the integrated amplifier is
switched off, selecting a source device switches the
integrated amplifier on and also selects the corresponding
source device.
Music Player
   
-
 
 
Disc input
  –       A1 / Phono
 –   
    A2 / TV
  –       A3 / Tuner
 
 
Record
  (gelb)   brief press:
-   + (gelb)
  Decrease / increase the volume level
The amplifier performs a small volume step first to enable a
fine and precise volume control. It automatically switches to
a continuous rotation of the volume control if the remote
control button is pressed for a longer time.
 
 
brief press:
long press:
No
present
Brief press:
Streaming Client
function of the
Music Player
CD function of the
Music Player
Digital-Input 1 of
the Music Player
Digital-Input 2 of
the Music Player
Radio function of
the Music Player
Switches loudspeakers on and off (MUTING)
Switches LOUDNESS on and off
Switches tone control on and off
Music Player
present
Long press:
-
-
A1 / Phono Input
of the Power Plant
A2 / TV Input of
the Power Plant
A3 / Tuner Input of
the Power Plant
Record
27