JVC KD-DB97BT Bedienungsanleitung Seite 20

AUDIO SETTINGS
SUB.W LEVEL * SPK-OUT *
1 2 (Not applicable when 3-way crossover is selected.)
00 to +06 (+03): Adjusts the output level of the
subwoofer connected via speaker lead. ( 29)
PRE-OUT –50 to +10 (00): Adjusts the output level of the
subwoofer connected to the lineout terminals (SW)
through an external amplifier. ( 29)
SUB.W ON / OFF: Turns on or off the subwoofer output.
FADER (Not applicable when 3-way crossover is selected.)
R15 to F15 (00): Adjusts the front and rear speaker output balance.
BALANCE *
3 L15 to R15 (00): Adjusts the left and right speaker output balance.
VOL ADJUST –15 to +06 (00): Preset the initial volume level of each source
(compared to the FM volume level). Before adjustment, select the source
you want to adjust.
AMP GAIN LOW POWER: Limits the maximum volume level to 25. (Select if the
maximum power of each speaker is less than 50 W to prevent damaging
the speakers.) ; HIGH POWER: The maximum volume level is 35.
SPK/PRE OUT (Not applicable when 3-way crossover is selected.)
Depending on the speaker connection method, select the appropriate
setting to get the desired output. ( 19, Speaker output settings)
SPK SIZE
Depending on the crossover type you have selected (see [X ' OVER TYPE]
below), 2-way crossover or 3-way crossover setting items will be shown.
( 19, Crossover settings)
X ' OVER
By default, 2-way crossover type is selected.
X ' OVER TYPE Caution: Adjust the volume before changing the X ' OVER TYPE to
avoid the sudden increase or decrease of the output level.
X ' OVER 2-WAY (Displayed only when [X ' OVER 3-WAY] is selected)
YES: Selects two way crossover type. ; NO: Cancels.
X ' OVER 3-WAY (Displayed only when [X ' OVER 2-WAY] is selected)
YES: Selects three way crossover type. ; NO: Cancels.
18
SND EFFECT
(Not applicable for FM/AM source and DAB source.)
ENHANCE
SML/ MED/ LRG: Virtually enhances the sound space. ; OFF: Cancels.
RESPONSE LV1/ LV2/ LV3: Virtually makes the sound more realistic. ; OFF: Cancels.
SOUND LIFT LV1/ LV2/ LV3: Virtually adjust the sound position heard from the
speakers. ; OFF: Cancels.
ON: Boosts the frequency to reduce the noise heard from outside the car
VOL LINK EQ
or running noise of the tyres. ; OFF: Cancels.
K2 (Not applicable for FM/AM source, DAB source and AUX source.)
ON: Improve the sound quality of compressed music. ; OFF: Cancels.
*
1 Displayed only when [SUB.W] is set to [ON].
*
2
For 2-way crossover: Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W].
( 19)
* 3
This adjustment will not affect the subwoofer output.