JVC KD-DB97BT Bedienungsanleitung Seite 15

BLUETOOTH®
To
While having two active calls...
End current call and
activate held call
Swap between the
current call and held call
Adjust the phone volume
[00] to [35] (Default: [15])
Switch between hands-free
and private talk modes
Improve the voice quality
While talking on the phone....
Press and hold .
1
Turn the volume knob to select an item (see the following table), then press
2
the knob.
Repeat step until the desired item is selected or activated.
3 2
Press to exit.
4
To return to the previous setting item, press
MIC LEVEL
–10 — +10 (–4): The sensitivity of the microphone increases as the number
increased.
NOISE RDCT –5 — +5 (0): Adjust the noise reduction level until the least noise is being heard
during a phone conversation.
ECHO CANCEL –5 — +5 (0): Adjust the echo cancellation delay time until the least echo is being
heard during a phone conversation.
On the faceplate
Press and hold or the volume knob.
Press .
Turn the volume knob during a call.
• This adjustment will not affect the volume of
the other sources.
Press during a call.
• Operations may vary according to the
connected Bluetooth device.
.
Make the settings for receiving a call
Press to enter Bluetooth mode.
1
Turn the volume knob to select an item (see the following
2
table), then press the knob.
Repeat step
3
activated.
To return to the previous setting item, press
SETTINGS
AUTO ANSWER
RING COLOR
Default: XX
until the desired item is selected or
2
01 SEC — 30 SEC: The unit answers incoming call
automatically in the selected time (in seconds). ;
OFF: Cancels.
COLOR 01 — COLOR 49 (COLOR 08): Selects the
notification light color for the buttons when there is an
incoming call and during a call. ; OFF : Cancels.
.
Default: XX
ENGLISH 13